Kaption Audio 570-azr400x4 Owner's Manual - Speaker Wiring Connections
- 9 -
Multi Channel Amplifiers
Speaker wiring connections
570-AZR400X4
4 Speaker setup
chassis, sand all the paint away from the contact point. A grounding block
like the Street Wires GT4 should be used whenever possible as this piece of
equipment has 5 times the surface area of a normal screw.
The gauge of the power and ground wire is often an overlooked aspect
of amplifier installation. The more power the amplifier receives, the more
power it will produce. Power cables have a natural resistance, and will lose
voltage by the time the power makes its way to the amplifier. The large
gauge diameter wire will hold more voltage over longer runs. Also, by having
a larger diameter ground wire, the amplifier can run more efficiently. It
recommends using a minimum of 4 gauge power and ground cables to get
the best performance.
Double check all the previous connection installation steps, in particular the
speaker and power wiring. Securely mount the amplifier. If everything is in order,
reconnect the vehicle’s negative battery connection and begin following the
Feature Setup and Adjustments steps.
X-OVER
X-OVER
X-OVER
X-OVER