Summary of B 80 W Bp
Page 1
Register and win! Www .Kaercher .Com b 80 w bp 59643610 03/13.
Page 2
2.
Page 5
Http://www.Kaercher.Com/dealersearch.
Page 6
- 1 please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent own- ers. Before using the appliance for the first time, read and observe these operating instruc- tions and the accompanying brochure: safety infor...
Page 7
- 2 1 parking brake 2 rotary handle to incline the vacuum bar 3 height adjustment of suction bar 4 wing nuts for fastening the vacuum bar 5 suction hose 6 vacuum bar * 7 connecting cable for charger 8 storage compartment for mains cable 9 driving lever 10 operator console 11 storage surface for clea...
Page 8
- 3 1 off device is switched off 2 transport mode driving to the place of use. 3 eco mode wet clean the floor (with reduced brush speed) and vacuum up wastewater (with reduced suction). 4 normal mode wet clean the floor and vacuum up dirt water. 5 increased brush contact pressure wet clean the floor...
Page 9
- 4 insert the vacuum bar into the vacuum bar suspension in such a manner that the profiled sheet is positioned above the suspension. Tighten the wing nuts. Insert the suction hose. Check if the height adjustment is mounted on the inside of the vacuum bar. When the height adjustment is mounted on th...
Page 10
- 5 to improve the vacuuming result on tiled floors the vacuum bar can be turned to an oblique position of up to 5°. Loosen the wing nuts. Turn the vacuum bar. Tighten the wing screws. If the vacuum result is unsatisfactory the in- clination of the straight vacuum bar can be modified. Adjust the rot...
Page 11
- 6 confirm the changed setting by press- ing the info button or wait till the set val- ue is automatically accepted after 10 seconds. Select the next parameter by turning the info button. After all desired parameters have been modified, turn the info button until "exit menu" is displayed. Press the...
Page 12
- 7 1 wear indicator 2 vacuum lip the vacuum lips must be replaced or re- versed if they are worn down to the wear in- dicator. Remove the vacuum bar. Unscrew the star grips. Remove the plastic parts. Remove the vacuum lips. Insert new or reversed vacuum lips. Insert the plastic parts. Screw in and ...
Page 13
- 8 please observe the following warning notes when handling batteries: danger danger of explosion. Do not put tools or similar on the battery, i.E. On the terminal poles and cell connectors. Risk of injury. Ensure that wounds never come into contact with lead. Always clean your hands after having w...
Page 14
- 9 danger risk of injury! Before working on the appli- ance, remove the intelligent key and the mains plug of the charger. Drain and dispose of the dirt water and the residual fresh water. If the display shows different error messag- es or if the error cannot be remediated: remove the intelligent k...
Page 15
- 10 accessories br appliance b 80 (brush roller accessories) description part no.: working width 650 mm part no.: working width 750 mm description packaging unit appliance requires brush roller, red (medium, standard) 6.906-935.0 6.906-936.0 also for regular cleaning of heavily dirtied floors. 1 2 ...
Page 16
- 11 we hereby declare that the machine de- scribed below complies with the relevant basic safety and health requirements of the eu directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is m...