Karcher BD 55/60 W Ep Instructions Manual - page 22
22
English
Î Add detergent. Follow dosing instruc-
tions for detergent.
Î Adjust the water quantity using the reg-
ulating button according to the dirt on
the floor covering.
Note
Carry out the initial cleaning attempts with
little quantities of water. Increase water
quantity step-by-step until the desired
cleaning result is achieved.
Î Turn the lever downwards; the vacuum
bar is lowered and the suction turbine is
switched on.
Note
For cleaning tiled floors, set the straight
vacuum bar in such a way that cleaning is
done at right angles to the joints.
The inclined position and the inclination of
the vacuum bar can be adjusted to achieve
better suction results (see "Setting the Vac-
uum Bar").
몇
Warning!
Risk of damage to the floor covering. Do
not operate the appliance on the spot.
Î Press the pedal downwards; move it to
the left and release it upward. The
cleaning head is lowered and the brush
motor starts automatically.
Î Adjust brush contact pressure at the le-
ver.
Routine cleaning and ba-
sic cleaning of industrial
floors
RM 69 ASF
Routine cleaning and ba-
sic cleaning of fine stone-
ware tiles
RM 753
Routine cleaning of tiles in
sanitary areas
RM 751
Cleaning and disinfection
in sanitary areas
RM 732
Removal of coating from
all alkali-resistant floors
(e.g. PVC)
RM 752
Removal of coating from li-
noleum floors
RM 754
Settings
Setting the water quantity
Lower the vacuum bar
Switching on the cleaning head