English 5.906-485.0 rev. 00 (05/09) 1 cv 38/2 cv 48/2 service manual.
2 english 5.906-485.0 rev. 00 (05/09) contents 1 preface 3 2 safety instructions 3 3 technical features 3 4 parts of the system 4 5 basic settings and service procedures 5 6 maintenance and care 8 7 troubleshooting 11 8 technical specifications 13 9 circuit diagram 14.
English 5.906-485.0 rev. 00 (05/09) 3 good service work requires extensive and practice-oriented train- ing as well as well-structured training materials. Hence we offer regular basic and advanced training programmes covering the entire product range for all service engineers. In addition to this, w...
4 english 5.906-485.0 rev. 00 (05/09) 1 brush cover 2 brush 3 brush head 4 indicator bundle (cv 38/2 only) 5 unlocking brushg head 6 upholstery nozzle 7 crevice nozzle 8 handle adjustment 9 indicator lamp on the filter housing (red) 10 handle 11 suction hose 12 suction pipe 13 power switch 14 filter...
English 5.906-485.0 rev. 00 (05/09) 5 1 fastening screws for rear cover 2 cable hook 3 handle adjustment 4 rear cover unscrew locking screws. remove rear cover. replace the cable hook or the handle adjustment. install the new cable hook or a new handle adjustment in re- verse sequence. 1 top...
6 english 5.906-485.0 rev. 00 (05/09) 8 circuit board with casing pull the connection plug of the mains cable off the appliance switch (top). remove the clamp. remove the mains cable from the cable guide. install the new mains cable in reverse sequence. The low pressure sensor on the printed...
English 5.906-485.0 rev. 00 (05/09) 7 1 switch cam 2 brush motor switch 3 brush motor 4 brush motor electronics 5 safety bumper 6 brush head casing 7 bearing bowl incl. Spring clamp 8 fastening screws of the casing top 9 housing top 1 drive pinions of the brush motor 2 drive belt 3 fastening screws ...
8 english 5.906-485.0 rev. 00 (05/09) 1 fastening screws of the casing top 2 housing top 3 bearing bowl incl. Spring clamp and switch cams 4 bearing bowl incl. Spring clamp pull the bearing bowls off to the side. unscrew locking screws. remove the top part of the casing. 1 suction turbine 2 po...
English 5.906-485.0 rev. 00 (05/09) 9 cv 38/2.
10 english 5.906-485.0 rev. 00 (05/09).
English 5.906-485.0 rev. 00 (05/09) 11 7 troubleshooting 2 3 2 1.
12 english 5.906-485.0 rev. 00 (05/09) – no electrical voltage. check cables, plugs, fuse, and socket. – thermostat switched off the motor because of overheating pull mains plug, replace blocked filters, or remove blockage from the suction hose. The unit is operational again after it has cooled ...
English 5.906-485.0 rev. 00 (05/09) 13 the technical specification sheet and the circuit diagram will be in- cluded in the next version of the spare parts cd (disis) and in the intranet. – technical specification sheet: folder "central / service info int'l / technical specifications" – circuit diagr...
14 english 5.906-485.0 rev. 00 (05/09) 9 circuit diagram 1 23456789 10 11 12 13 pe l2 l1 5190952 00 0 0 2018352 slp fma smd-w pressure control brush monitoring gb d f e h1 rote kontroll-lampe filtertÜtenwechsel l1/l2 entstÖrdrosseln m1 m2 n1 n2 p1 r1/r2 s1 s2 x1 saugturbine bÜrstmotor schaltelektron...
English 5.906-485.0 rev. 00 (05/09) 15 1 23456789 10 11 12 13 pe l2 l1 pe 5194512 0 0 2021889 slp fma smd-w pressure control brush monitoring gb d f e h1 rote kontroll-lampe filtertÜtenwechsel l1/l2 entstÖrdrosseln m1 m2 n1 n2 p1 saugturbine bÜrstmotor schaltelektronik schaltelektronik druckschalter...
