Karcher DAB 2405 User Manual - page 25
EN
EN | 25
6.
Choose the source of the alarm between Buzzer, DAB+ & FM using the ◄ / ► buttons.
If you choose DAB or FM the next step is to choose the station you want to play when
the alarm sounds. There is a choice of “Last station listened to”, or a preset station (if any
stored). Press the ENTER button to proceed once selected.
7.
Next is the option to only have the alarm activate on WEEKDAYS, DAILY, ONCE and
WEEKENDS. Select which you require using the ◄ / ► buttons. Press the ENTER but-
ton to store the setting.
8.
The next step is to set the volume level you require. Use the ◄ / ► buttons to set and
press ENTER to save the alarm settings.
9.
The next step is to use the ◄ / ► buttons to select the Alarm status ON or OFF. Press
ENTER to proceed. Alarm Saved will appear on the display to indicate the alarm status
has been saved.
10.
To silence the alarm when sounding press the ENTER button. The alarm will sound for
one hour, without pressing the ENTER button.
11.
To disable the alarm return to the “Alarm” screen, press the ENTER button to proceed to
the alarm setup menu. Use the ◄ / ► buttons to choose OFF and press ENTER to save.
Notes:
•
In standby the alarm icon will display in STANDBY mode when activated.
•
The alarm will only sound when the unit is in standby mode, not when it is switched off by
the ON/OFF switch or disconnected from the power supply.
•
If you selected DAB+ for alarm mode but there is no signal when the alarm is supposed
to come on, the unit will switch to Buzzer mode.
Snooze
When the alarm sounds you can press the SLEEP / button to activate the SNOOZE mode
and delay the alarm for 5 minutes.
To cancel the snooze function, press and hold briefly the SLEEP / button until “Alarm off” is
shown in the display.
OSD Language
The language of the OSD menu can be changed as follows:
1.
Press and hold the INFO/MENU button for 2 seconds.
2.
When the “Full Scan” (DAB) or “Scan Setting” (FM) option appears press either ◄ or ►
and find “System”, press the ENTER button.
3.
Use the ◄ or ► buttons find the
4.
Using the ◄ or ► buttons select from the available languages: “English” (default setting),
“German”, “French”, “Dutch”, “Italian”. Press the ENTER button to change the setting.
Backlight
To set the backlight time out duration follow the below steps:
1.
Press and hold the INFO/MENU button for 2 seconds.
2.
When the “Scan Setting” (FM) or “Full Scan” (DAB) option appears press either ◄ or ►
and find “System”, press the ENTER button.
3.
Use the ◄ or ► buttons find the
4.
Using the ◄ or ► buttons select from the available durations: “ON” (backlight remains on
while the unit is on), “10 sec”, “20 sec”, “30 sec”, “45 sec”, “60 sec”, “90 sec”, “120 sec”