Karcher DAB 2405 User Manual - page 26
26 | EN
and “180 sec”. Press the ENTER button to change the setting.
Factory Reset
To reset the radio to the factory settings follow the below steps:
1.
Press and hold the INFO/MENU button for 2 seconds.
2.
When the “Scan Setting” (FM) or “Full Scan” (DAB) option appears press either ◄ or ►
and find “System” and press the ENTER button.
3.
Use the ◄ or ► buttons to find the “Factory Reset” option and press ENTER.
4.
Choose “Yes” and press the ENTER button.
5.
The software will return to the default settings and re-scan for DAB stations.
Note: All user settings will be lost.
Headphone Jack
A headphone jack is located at the back of the unit. When the unit is powered on and playing
music, you can connect earphones (not included) to the headphone jack for your private listen-
ing. Mind the safety information from page 16 on.
With headphones connected the unit’s speaker is disabled. To listen via the speaker again,
disconnect the headphones.
Technical Specifications
Rated Voltage (adaptor):
AC 100-240V ~ 50/60Hz, 0.3A
Adaptor Output:
DC 5V
1A
Batteries:
4x 1.5V AA size (not included)
Radio Frequency Range:
DAB: 174 - 240 MHz
FM 87.5 - 108 MHz
Dimensions (WxDxH) ca.:
180 x 40 x 90 mm
Technical specifications and design may change without notice.