Karcher G 2200 Owner's Manual - Using The Accessories
English 11
►
Open water source.
►
Start the Engine
1. Turn the engine switch to "ON"
position.
2. Pull trigger on spray gun to release
pressure.
3. Locate recoil cord and pull slowly
until resistance is felt. At this point,
pull rapidly to start engine.
NOTE: If unable to start the engine,
repeat the above operation one or two
times.
Cleaning Procedure:
►
Position the tip of the wand 6-8”
(15-20 cm) away from the surface to
clean at a 45°angle.
The color-coded quick connect
nozzles provide a wide array of spray
widths from 0° to 65° and are easily
accessible when placed in the
convenient nozzle holder.
0° spray angle = Red nozzle
For particularly stubborn accumulation
of grime. Not recommended for soft
materials like sidings, decks, painted
surfaces, cars.