Hd 7/11-4 m 59669030 11/16 english 3.
2.
– 1 please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent own- ers. Please unfold the front picture side 1 storage compartment for nozzles 2 handle 3 high-pressure connection easy!Lock 4 pressure/ quantity ...
– 2 high-pressure jets can be dan- gerous if improperly used. The jet may not be directed at persons, animals, live electrical equipment or at the appliance itself. According to applicable regula- tions, the appliance must never be used on the drinking water net without a system separator. A suit- a...
– 3 electrical and electronic devices often con- tain components which could potentially pose a danger to human health and the en- vironment if handled or disposed of incor- rectly. However, these components are necessary for the proper operation of the device. Devices marked with this symbol must n...
– 4 impedance present on your connection, please contact your utilities provider. – the plug and coupling of the extension cable used must be watertight. – use the extension cord that has an ade- quate cross-section (see "technical data") and unwind it fully from the cable drum. For connection value...
– 5 set working pressure and flow rate through turning (runless) at the pres- sure- and amount regulation (+/-). Close the hand spray gun. Turn the casing of the nozzle till the de- sired symbol matches the marking. 몇 warning unsuitable detergents can cause damage to the appliance and to the object ...
– 6 attention frost will destroy the not completely water drained device. Store the appliance in a frost free area. Drain water. Pump in conventional frost protection agents through the appliance. Note: use normal glycol-based anti-freezing agents for automobiles. Observe handling instructions of th...
– 7 unscrew lid with filter. Clean the filter with clean water or com- pressed air. Reinstall in reverse sequence. Have the maintenance of the device performed by the customer service. Oil change. Note: see "specifications" for oil volume and type. Unscrew the fastening screws of the device hood; re...
– 8 the warranty terms published by the rele- vant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in man- ufacturing. In the event of a war...
– 9 technical specifications main supply voltage v 230...240 current type hz 1~ 50 motor rpm 1/min 1400 connected load kw 3,0 protection (slow, char. C) a 13 type of protection ipx5 maximum allowed net impedance ohm 0.294+j0.184 extension cord 30 m mm 2 2,5 water connection max. Feed temperature °c ...
Http://www.Kaercher.Com/dealersearch.
