Register and win! Www .Kaercher .Com hd 7/11-4 m hd 7/11-4 mx 59649740 12/12 english 6.
2.
3.
Hd 7/11-4m 4.
Hd 7/11-4 mx 5.
– 1 please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent own- ers. Please unfold the front picture side 1 storage compartment for nozzles 2 handle 3 high pressure connection 4 pressure/ quantity regulation...
– 2 separator as per en 12729 type ba. Water flowing through a system separator is con- sidered non-drinkable. Caution always connect the system separator to the water supply, never directly to the appli- ance! – please follow the national rules and regulations for fuel spray jets of the re- spectiv...
– 3 mount the nozzle on the spray pipe (markings on the adjustment ring at the top). Install spray pipe on the hand-spray gun. Fasten the high pressure hose to the high pressure connection. Insert the crank in the hose drum shaft and lock it in. Before rolling up, stretch out the high pressure hose....
– 4 open the water supply. Screw the suction hose (order no. 4.440-270.0) onto the water connec- tion. Connect filter (order-no. 4.730-012.0) to suction hose. Deaerate the appliance: unscrew the nozzle. Switch on the appliance and let it run until the water exiting is bubble-free. At the end let the...
– 5 treatment of the environment use detergent economically. Follow the safety instructions for using de- tergents. Kärcher detergents ensure smooth func- tioning. Please consult us or ask for our cat- alogue or our detergent information sheets. Place the detergent bottle into the bottle holder on t...
– 6 ance. To carry, hold the appliance at the handles and not at the pushing han- dle. Prior to transporting the appliance in horizontal position, remove the deter- gent bottles from the bottle holder and close them. When transporting in vehicles, secure the appliance according to the guide- lines f...
– 7 check connection cable for damages. Check the supply voltage. Turn device switch on "0" and let engine cool off for at least 5 minutes. If malfunction still occurs, have device checked by customer service. Call customer service in case of elec- trical defects. Set nozzle to "high pressure". Clea...
– 8 we hereby declare that the machine de- scribed below complies with the relevant basic safety and health requirements of the eu directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is mo...
– 9 technical specifications type hd 7/11-4 m 1.524-129.0 gb main supply voltage v 230...240 current type hz 1~ 50 motor rpm 1/min 1400 connected load kw 3,0 protection (slow, char. C) a 13 type of protection ipx5 maximum allowed net impedance ohm 0.294+j0.184 extension cord 30 m mm 2 2,5 water conn...
Http://www.Kaercher.Com/dealersearch.
