Karcher K 2.27 User Manual - Assembly Instructions
6 English
Screwdriver, small size (not supplied)
for connecting high pressure hose and
trigger gun.
STEP 1:
Insert wheels into the body of the unit.
STEP 2:
Slide the transport handle into place.
STEP 3:
Install the supplied connector to the
unit’s water inlet.
Note: Never attach the garden hose
connector to the unit’s water inlet!
STEP 4:
A Pull out the locking slide of the trigger
gun handle.
B Insert the small end of the high pres-
sure hose into place.
C Push the locking slide back into the
trigger gun to lock the hose in posi-
tion.
STEP 1:
Connect the high pressure hose to
the unit’s high pressure outlet.
STEP 2:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
STEP 3:
1 Screw the supplied garden hose con-
nector on to the end of your garden
hose.
2 Push the garden hose connector on
to the water inlet connector and
make sure you hear it click into place
before proceeding.