Karcher K 3.500 Original Instructions Manual - Description of The Appliance
8
English
Illustrations on Page 2
1 Hose coupling
2 Coupling element for water connection
3 Quick coupling for high pressure hose
4 Water connection with integrated sieve
5 Appliance switch "0/OFF“/ „I/ON“
6 Transport handle
7 Detergent suction hose (with sieve)
8 Storage hook for high pressure hose
and mains connection cable
9 Mains cable with mains plug
10 Storage for accessories
11 Bearing wheel
12 Trigger gun
13 Lock trigger gun
14 Key to detach the high pressure hose
from the trigger gun
15 High pressure hose
16 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks. The work pressure can be stage-
lessly regulated between "Min" and
"Max". You can add detergent when
"Mix" is selected.
In order to adjust the working pressure,
release the lever of the trigger gun and
turn the spray lance to the desired posi-
tion.
17 Spray lance with Dirtblaster
For strong contaminations
** not included in the scope of delivery
18 Water supply hose
Use a fabric reinforced water hose with
a commercially available coupling. Min-
imum diameter 13 mm (1/2 inch); mini-
mum length 7.5 m.
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 3
Illustration
Insert the transport handle and screw
in.
Illustration
Hook the accessories net into the hooks
shown in the illustration.
Illustration
Screw the coupling element to the wa-
ter connection on the appliance.
Illustration
Push the high pressure hose into the
trigger gun until it locks audibly.
Note:
Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high pressure hose.
Description of the Appliance
Special accessories