Karcher K 3000 G Operator's Manual - Maintenance

English  

11

WINTERIZING AND LONG-TERM STORAGE

CARE AND MAINTENANCE INSTRUCTIONS

1     Disconnect all water connections.

2     Turn the machine on for a few seconds, until 

the water which had remained in the pump 

exits, then turn off immediately.

3     Do not allow high pressure hose to become 

kinked.

4     Store the accessories on the machine as 

shown in the picture below, in the following 

order:

  a. Vario Power Spray Wand and Dirtblaster®.

  b. Power cord

   c. High Pressure Hose

  d. Gun

5     Store the machine and accessories in a room 

which does not reach freezing temperatures. 

DO NOT store near furnace or other sources 

of heat as it may dry out the pump seals.

CAUTION

  Failure to follow the above directions will result 

in damage to the pump assembly and acces-

sories and will void the warranty. Kärcher® 

also recommends the regular practice of 

using a pump protector like Kärcher® Pump 

Guard (9.558-998.0) to prevent cold weather 

damage during storage in the winter months.

Cleaning the water inlet filter

Maintenance

STEP 1:

  Disconnect the connector from the water inlet.

STEP 2:

  Pull out water inlet filter with needle-nose  

pliers.

STEP 3:

  Rinse out water inlet filter in warm water.

STEP 4:

  Reinsert water inlet filter into the water inlet.

The unit is maintenance-free.

a

a

b

c

d