Karcher K1102 Operating Manual - page 6
3
English
1. Equipment features
A1
Unit socket
A2
Safety cap
A3
Funnel inlet for filling boiler
A4
Steering rollers
A5
Heater switch
A6
Indicator lamp – low water warning
C1
Steam gun
C2
Release button
C3
Steam switch
C4
Steam control
C5
Steam hose
C6
Accessory plug
D1
Extension tube
D2
Release button
E1
Spot nozzle
E2
Circular brush
F1
Hand nozzle
F2
Terry-towelling slip-on
G1 Floor nozzle
G2 Retaining clips
G3 Large floor cloth
2. Getting started
2.1 Unpacking the cleaner
While you are unpacking the steam cleaner,
check that all accessories have been included.
If any items are missing, please contact your
dealer.
If you notice any damage that has been caused
in transit, please inform your dealer immediate-
ly.
Do not dispose of the packaging materials as
domestic refuse. They can be recovered for use
again. Take the packaging to an official collec-
tion point for recycling.
2.2 Attaching the accessories
Turn the container over, and press the swivel
casters into the holes provided until they lock
into place
Firmly insert the accessory plug (C6) into the
socket (A1).
Attached the required accessory to the steam
gun (C1) by pushing the tubular end of the
accessory onto the steam gun (C1). Push the
accessory onto the steam gun as far as ne-
cessary for the release button (C2) on the
steam gun to lock into place (see Fig. 1).
Fig. 1: Attaching accessories to the steam gun (C1)
Use the extension tubes (D1) if required. At-
tach one or both tubes onto the end of the
steam gun.
Push the required accessory onto the free
end of the extension tube (D1).
To detach the accessories, press the release
button (C2 or D2) and pull the items apart.
The circular brush (E2) can be attached to
the spot nozzle (E1) to obtain better cleaning
results. Line up both grooves in the circular
brush (E2) with the lugs on the spot nozzle
and turn the brush clockwise as far as it will
go.