Karcher MC 6560 User Manual - page 28
28 | EN
PROGRAM MODE
User can make the program up to 32 tracks in CD mode or 64 tracks in MP3/WMA/USB/SD CARD
mode in any desired order. Program mode is activated while in stop mode.
1. How to play the program
- CD
1. Press the MEM/C-ADJ. button, shift to PROGRAM mode.(F19)
2. Press the SKIP/TUNER SEARCH(UP or DOWN) button, the track number will be changed.
3.
Press the MEM/C-ADJ. button to confirm the track number.
- MP3/WMA/USB/SD CARD
1.
Press the MEM/C-ADJ. button, shift to PROGRAM mode. The album number is flashing. (F20)
2. Press the PRESET/FOLDER button, the album number will be changed.
3.
Press the MEM/C-ADJ. button, the track number is flashing.(F21)
4. Press the SKIP/TUNER SEARCH button, the track number will be changed.
5.
Press the MEM/C-ADJ. button to confirm the track number.
2. PROGRAM PLAY
Press the PLAY/PAUSE button on the unit (or remote control), it will be play starting with the first track
of the program. When all tracks have been played, the unit display will show the number of tracks and
the playing time of the CD/MP3/WMA tracks.
3. CANCEL PROGRAM
1. Press the STOP button once, or open the CD tray door and close it again then the memory will
be erased.
2. Set a new program, the existing one will be cleared.
Notes:
1. Press the “REPEAT” button once, the “REPEAT” indicator will light on the display. Then the main
unit will repeat the current track.
2. Press the “REPEAT” button twice, the “REPEAT ALL” indicator will light on the display. Then the
main unit will repeat all the total number of tracks.
3. Press the “REPEAT” button once more again. The main unit will return to play the program
normally.
AUX IN PLAY
The AUX input is located on the left hand side of the unit. Use a 3.5mm stereo jack cable to connect
audio equipment through the LINE IN jack.
1. To select the AUX input function, repeatedly press the FUNCTION button on the unit (or remote
control) until the AUX is indicated on the display.
2. Start playback on the external component.
Note:
LINE in cable not included
MUTE SETTING (on the remote control)
1.
When you press the MUTE button once on the remote control, the volume level will flash and the
audio output will be temporarily terminated.(F22)