1. DL manuals
  2. Karcher
  3. Vacuum Cleaner
  4. NT 45/1 Tact
  5. Service Manual

Karcher NT 45/1 Tact Service Manual

Other manuals for NT 45/1 Tact: User Manual, User Manual, User Manual

Summary of NT 45/1 Tact

  • Page 1

    English 5.906-498.0 rev. 00 (09/09) 1 nt 45/1 tact te ec service manual.

  • Page 2

    2 english 5.906-498.0 rev. 00 (09/09) contents 1 preface 3 2 safety instructions 3 3 technical features 3 4 parts of the system 4 5 basic settings and service procedures 5 6 maintenance and care 11 7 troubleshooting 11 8 technical specifications 12 9 circuit diagram 13.

  • Page 3

    English 5.906-498.0 rev. 00 (09/09) 3 good service work requires extensive and practice-oriented train- ing as well as well-structured training materials. Hence we offer regular basic and advanced training programmes covering the entire product range for all service engineers. In addition to this, w...

  • Page 4

    4 english 5.906-498.0 rev. 00 (09/09) 1 electrodes 2 suction hose 3 cable hook 4 air outlet, working air 5 suction head lock 6 impeller 7 air inlet, motor cooling air 8 dirt receptacle 9 steering roller bow 10 suction head 11 steering roller 12 suction support 13 floor nozzle 14 suction pipe 15 carr...

  • Page 5

    English 5.906-498.0 rev. 00 (09/09) 5 25 floor nozzle holder 26 holder for floor nozzle 27 holder for suction pipes 28 power cord 29 nameplate danger first pull out the plug from the mains before carrying out any tasks on the machine. 1 grounding contact 2 left electrode 3 rubber foam string 4 filte...

  • Page 6

    6 english 5.906-498.0 rev. 00 (09/09) 1 electric solenoid 2 solenoid plate 3 spring, hard 4 o ring 5 support 6 filter cover 7 spring, soft 8 valve disks 9 magnet-holder 1 hood 2 connecting cable for electric solenoid 3 electric solenoid 4 fastening screw for solenoid holder 5 filter cover 6 cover of...

  • Page 7

    English 5.906-498.0 rev. 00 (09/09) 7 insert a new connecting cable and connect it to the circuit board and the electric solenoid. Route the cables as shown in drawing (dotted line box). 1 instrument panel 2 hood note: during the installation of the hood, make sure that the guides of the hood (see a...

  • Page 8

    8 english 5.906-498.0 rev. 00 (09/09) 1 terminal strip x2 2 control chip 3 ground cable (protective conductor) 4 neutral conductor 5 phase 6 power cord 7 main switch disconnect the ground cable (protective conductor) on the ter- minal strip x2. Disconnect the phase and the neutral connector on the m...

  • Page 9

    English 5.906-498.0 rev. 00 (09/09) 9 1 indicator lamp 2 rotary switch for suction output (min-max) 3 micro switch 4 instrument panel 5 socket replace the control lamp, the socket, the micro switch and the control dial if necessary 1 fastening screws for turbine housing 2 turbine circuit board 3 tur...

  • Page 10

    10 english 5.906-498.0 rev. 00 (09/09) 1 filter casing 2 suction turbine place the new suction turbine on the adapter plate and align it as per the drawing (dotted line). Screw on the ground cable. Install the turbine casing in the reverse sequence. Connect the connection plug of the turbine. 1 left...

  • Page 11

    English 5.906-498.0 rev. 00 (09/09) 11 danger first pull out the plug from the mains before carrying out any tasks on the machine. Open filter door. Replace the flat pleated filter. Close the filter door, it must lock into place. Release and remove the suction head. Clean the electrodes. Insert and ...

  • Page 12

    12 english 5.906-498.0 rev. 00 (09/09) the status of the attached circuit diagram represents the creation date of the service manual. This circuit diagram is not updated. When working on the device, please always use the current circuit diagram in kärcher-inside. There are no special tools necessary...

  • Page 13

    English 5.906-498.0 rev. 00 (09/09) 13 9 circuit diagram 1 23456789 10 11 12 13 -h1 x1 x2 l2 l1 pe pe fma 2026054 a 1 tmd-w 5189521 slp 01 braun brown brun grÜn/gelb green/yellow vert/jaune marrÓn blau blue bleu azul verde/amarillo x1 gb b1 elektroden d1 h1 steckdose entstÖrfilter te: kontroll-lampe...