Karcher RR 5060 User Manual - page 7
18 | EN
3.
Though the sound stops, the disc will continue to spin. To re-start playback, press CD PLAY/
PAUSE BUTTON again, music will start from the exact position where it was interrupted.
4.
To stop CD playback, press CD STOP BUTTON once whether CD is in Play or Pause mode;
LCD DISPLAY will show total track number of the disc.
5.
To turn off the unit, slide FUNCTION SWITCH to “OFF” position.
Skip and search mode
1.
During play or pause mode, when CD SKIP/SEARCH FORWARD
ŹŹ| or BACKWARD |ŻŻ%87-
TON is pressed once, it will go to next track or go back to the beginning of the track.
2.
During play mode, when CD SKIP/SEARCH FORWARD
ŹŹ| or BACKWARD |ŻŻ%87721LV
pressed and held, it will search the track with audible high-speed forward or backward playback.
Repeat mode
1.
Repeat 1:
When MODE BUTTON is pressed once, Repeat indicator “
” will be
shown on LCD DISPLAY. This single track of music will be repeated.
2.
Repeat All:
When MODE BUTTON is pressed twice, Repeat All indicator “
” will
be shown on LCD DISPLAY. The whole disc can be played continu-
ously.
3.
To cancel repeat function:
Press the MODE BUTTON repeatedly until Repeat indicator disappears
from LCD DISPLAY.
Random play mode
This feature allows tracks on the disc to be played in a random order.
1.
During CD stop mode, press the MODE BUTTON three times, “RAN-
DOM” indicator will be shown on LCD DISPLAY and all music will be
played in random order automatically.
2.
To cancel random play function, press the MODE BUTTON again, “RAN-
DOM” indicator will disappear from LCD DISPLAY.
Program mode
1.
During CD stop mode, press PROGRAM BUTTON once. The “PRO-
GRAM” indicator and number of Program to be memorized starts from
WKH¿UVWSURJUDP
will light up and blink continuously.
Press CD SKIP/SEARCH FORWARD
ŹŹ| or BACKWARD |ŻŻ%87721
to your desired musical track, LCD DISPLAY will show this appropriate track number. Press the
PROGRAM BUTTON to store this track in memory.
2.
Repeat above procedure until all desired tracks have been programmed. A total of 20 tracks can
be stored into memory.
Remarks:
Whenever CD SKIP/SEARCH FORWARD
ŹŹ| or BACKWARD |ŻŻ
%87721LVSUHVVHGLWZLOODOZD\VVKRZWKHODVWSURJUDPPHGWUDFN¿UVWWR
recall your memory.
After complete programming, LCD DISPLAY will show “PROGRAM_ _ _”
DQGÀDVKFRQWLQXRXVO\
3.
Press CD PLAY/PAUSE BUTTON once to start program playback; CD
Play indicator “
Ź” will light up.
4.
To check the program you have stored after complete programming,
press PROGRAM BUTTON once during CD stop mode; then press CD
SKIP/SEARCH FORWARD
ŹŹ| BUTTON once, LCD DISPLAY will show
Track 8 is to be repeated
Repeat All Indicator