Karcher RR 5060 User Manual - page 9
20 | EN
mode.
6.
To turn off the unit, slide FUNCTION SWITCH to “OFF” position.
Repeat mode
1.
Repeat 1:
When MODE BUTTON is pressed once, Repeat indicator
will light.
This single track of music will be repeated.
2.
Repeat Folder:
When MODE BUTTON is pressed twice, the
and ALBUM indicator
ZLOOEHVKRZQ7KLVVSHFL¿FIROGHUZLOOEHSOD\HGUHSHDWHGO\
Remark:
The folder and track number will be shown every 2 seconds alternatively.
3.
Repeat All:
When MODE BUTTON is pressed three times, Repeat All indicator
will be shown. The whole disc can be played continuously.
4.
To cancel repeat function
Press the MODE BUTTON repeatedly until Repeat indicator disappears
from LCD DISPLAY.
Random play mode
This feature allows tracks on the disc to be played in a random order.
1.
During CD stop mode, press MODE BUTTON four times; the RANDOM
indicator will show on LCD DISPLAY and all music will be played in ran-
dom order automatically.
2.
To cancel random play function, press MODE BUTTON again, RANDOM
indicator will disappear from LCD DISPLAY.
Program mode
1.
During CD stop mode, press PROGRAM BUTTON once. The PROGRAM
LQGLFDWRUDQGQXPEHURI3URJUDPWREHPHPRUL]HGVWDUWVIURPWKH¿UVW
program
will light and blink continuously. Press the FOLDER BUT-
TON, then press CD SKIP/SEARCH FORWARD
ŹŹ| or BACKWARD |ŻŻ
BUTTON to select your desired musical track; LCD DISPLAY will show
WKHWUDFNQXPEHURIWKLVVSHFL¿F$OEXPWREHSURJUDPPHG3UHVV352*5$0%87721WRVWRUH
this track in memory.
2.
Repeat above procedure until all desired tracks have been programmed.
Remarks:
Whenever FOLDER BUTTON is pressed it will always show the last programmed
$OEXPQXPEHU¿UVWWRUHFDOO\RXUPHPRU\
A total of 20 tracks can be stored in memory. After complete programming, LCD DISPLAY will
show “PROGRAM _ _ _” and blink continuously.
3.
To start programmed playback, press CD PLAY/PAUSE BUTTON once and CD Play indicator
“
Ź´³352*5$0´DQGWKHWUDFNQXPEHURIWKHVSHFL¿F$OEXPZLOOOLJKWXS
Example: Album #3, Track #2
Press FOLDER button
to read ALBUM number
4.
To check the program you have stored after complete programming, press PROGRAM BUT-
TON once during CD stop mode; LCD DISPLAY will show
and blink continuously. Press