Karcher UR 1320BT User Manual - page 15
EN | 15
EN
1.
On/Standby button
2.
Function button
3.
Recall/Memory button
4.
Back / M- / Tune- button
5.
Play/Pause / Pairing button
6.
Next / M+ / Tune+ button
7.
Volume Down / Alarm button
8.
Volume Up / Clock Set button
9.
Dimmer / Snooze / Sleep button
10. Display
11. FM wire antenna
12. DC jack
13. AUX In socket
14. USB (charging socket only)
Power Supply
•
Connect the supplied AC/DC adaptor to the DC In connector on the backside of the unit and plug
the adaptor into a suitable wall power outlet.
•
Ensure that the output power of the outlet matches the input power of the adaptor and the unit.
•
The unit is now in standby mode (clock display).
•
To switch the unit on, press the
On/Standby button.
•
Switch the unit into standby mode after use by pressing the
On/Standby button.
•
To completely disconnect the unit from the power supply or when it is not used for a longer period
of time, remove the AC/DC adaptor from the power outlet (clock setting will be lost).
Intelligent Power Saving System
This unit has a built-in power saving system which will automatically put the system into standby mode
to reduce power consumption when it detects that the unit is not in use.
This automatic switch into standby mode will happen approximately 10-15 minutes after there is no
input signal detected in BT or AUX In mode.
To reactivate the unit, press the
On/Standby button to switch it back on.
First Use & Basic Functions
Clock Setting
This unit has a built-in digital clock which is displayed at all times while the unit is being
powered.
The clock can only be set while the unit is in standby mode (clock display).
1.
With the unit in standby mode, press and hold for 2 seconds the
Clock Set button.