- DL manuals
- Karel
- Telephone
- FT 15
- Technical Reference And User's Manual
Karel FT 15 Technical Reference And User's Manual
Summary of FT 15
Page 1
05/2010 4 line display feature telephone set technical reference and user guide.
Page 2: 4 Line Display Feature
4 line display feature telephone set technical reference and user guide may 2010
Page 4: Software Version
Ft15 ttkk- ver. Aab- 03.05.2010 karel reserves the right to make modifications in product features mentioned in this document for development and improvement purposes, without prior notice. Individual products may possess characteristics different from those that have been mentioned in this document...
Page 5
Issues to pay attention to · read this guide carefully before you use your device and keep it for later reference. · any mistake with the connections in your device may damage it or your exchange. Especially the connection to the exchange must be made by the authorized technical services. The explan...
Page 6
Preface chapters in this guide have been prepared in order to present detailed technical information to people who need technical-introduction-based information about the ft15 4 line display feature phones, in addition to giving technical information about programming and use of those telephones. By...
Page 7
Contents technical introduction..........................................................................1 introduction ............................................................................................1 compatibility ...........................................................................
Page 8
Common pool .................................................................................................. 24 feature............................................................................................................. 24 auto settings........................................................
Page 9
1 technical introduction introduction ft15 is a telephone set, which can be used with all ms series exchanges of karel, and that provides ease and rapidity to the usage of those systems. Note: ft15 is not compatible with the ms26s exchange, as an exception. By the ft15 telephone sets: • users are pr...
Page 10
2 general appearance 1 incoming call led 6 numerical key pad 2 display 7 special function keys 3 soft menu keys 8 handsfree speaker 4 speed dial keys 9 volume control key 5 navigation and special function keys 10 mute key technical specifications weight: approximately 1 kg dimensions: 25 cm x 20 cm ...
Page 11
3 user interface incoming call led this led indicates the user by blinking, when there is an incoming call or a new message. Display information presentation display is of four lines with 20 characters. The following information that facilitates usage is present on the lcd display, which indicates t...
Page 12
4 navigation keys and special function keys • “ navigation” keys (“5”, “6” ): user can move between features with these keys, when there are multiple options on the screen, also the related option can be enabled with them too. They are used to pass to the next/previous option or message in all of th...
Page 13
5 • “ park” key : a line or an internal conversation can be parked through this key during the conversation. When the call is parked by using that key, “parked line” information and ‘retrieve’ option for the line appear on the display. The call can be retrieved by pressing the “enter” key or by pres...
Page 14
6 voice control keys control of voice features of ft15 telephones are fulfilled by making use of four keys: “speaker”key: this is the key with red icon that puts the telephone into the “handsfree” status and that signifies this through an embedded led. The key is called hf key, and the led inside it...
Page 15
7 programmable speed dial keys two functions can be programmed for each of the speed dial keys, which consist of 12 keys with lights. Features that can be assigned to these keys through programming: · extension number · line number · private and common pool number · function services (services such ...
Page 16: Follow Me Key:
8 · follow me key: if this key is pressed and then if number of an extension is entered, then forwarding to that extension is actualized and then red led lights. If it is pressed again, then the forwarding is cancelled and the led goes out. · call back key: if a called extension is busy or not answe...
Page 17
9 code programming by the private pool programming menu: twenty most frequently called external numbers can be programmed into the private pool of the telephone. Moreover, functions supported by the exchange can also be assigned to the keys by applying private pool programming. (please refer to the ...
Page 18
10 installation connection points under ft15, there are five connection points and a switch that provides selection between the low/high voice levels. Connections and their characteristics have been illustrated below..
Page 19
11 ft15 installation in order to operate the telephone, first, the spiral handset cable is connected to the connection point under the telephone and to the handset. Then ft15 must be connected to the kts line of the exchange. Required hardware for the connection: ft15 is presented to the user togeth...
Page 20
12 those signals are present on the exchange connection box that is included in the exchange hardware: 1. + 12 vdc 2. Busy 3. No connection 4. No connection 5. Ground (gnd) 6. Data signal note: the “busy” signal is used for ky16 mini printer, which is another karel product. If the distance between t...
Page 21
13 cabling of the telephone while there is another device connected to the kts line of the exchange: 1) parallel connection should be made from the connection box of the device that has previously been connected to the kts line to the wires that carry data (white), +12 vdc (blue) and ground (black) ...
Page 22
14 number of ft15s that can be connected to the exchange and connection distances 1) the ft15 telephones can be connected to the first 16 extensions of the exchange. 2) number of ft15s that will be connected to the exchange and accessories using the external data line of the exchange should not exce...
Page 23
15 to hang the telephone on wall, two vertical holes (8 cm apart from each other) appropriate for the anchor plug and screws must be placed on the vertical surface where the telephone will be hung. The anchor plugs must be placed in the holes and the screws must be placed in these plugs such that th...
Page 24
16 ft15 start-up state the telephone set would be ready for operation after the required connections have been made and the correct extension number has been defined. The display and the programmable keys start to perform their functions. By default, there is no program assignment for the programmab...
Page 25
17 program features programming menus the user performs entrance to programming by making use of the flexibly functional selection key that is under the option “menu” that appears on the display or specially functional menu key, while the telephone is off hook and dial tone is being received. The pr...
Page 26
18 call options submenu titles: · call diversion o all calls/ extension no= o no answer/ extension no= o no answer cancel · auto dial o last number o private pool/ register no= o common pool/ register no= · paging o all o group/ extension no= o extension/ extension no= · missed calls · answered · di...
Page 27
19 paging in connection with the handsfree feature, pagings in several forms could be done in order to be heard through the speakers of the telephones while dial tone is being received. - all - group - private missed calls information about the most recent 20 missed calls for op50 successively viewe...
Page 28
20 phone settings submenu titles: · key settings o extension · press key / extension no= o line · press key / line no= o private pool · press key / register no=/ no= o common pool · press key / register no= o feature · press key o follow me o call back key o do not disturb key o phone lock key o con...
Page 29
21 · eprom version o system version o ft version · lazy mode o enable o disable · language · headphone o disable o with handsfree o without handsfree · signal beep option o enable o disable · price o last call o meter pulse price · line access code · return factory set. · backlight o level o on / of...
Page 30
22 extension you can reach an extension you call frequently through a single key by programming her/his number on that key. In order to do that, one first proceeds to the programming menu. ¨ press key: the key, on which the programming will be done, is pressed for a short or a long period in order t...
Page 31
23 ¨ line no: if a determined line number is entered and confirmed, then that line number will have been assigned to that key. Programming one of the line access codes such as01,02… for ft15 is sufficient for accessing the line directly when the programmed key is pressed. The programmed key detects ...
Page 32
24 common pool line numbers that have been stored in the common pool memory fields with number 00-49 by the operator can easily be assigned to the programmable keys. ¨ press key: the key, on which the programming will be done, is pressed for a short or a long period in order to select the first or t...
Page 33
25 auto settings there are five different options in order to program the programmable keys automatically. The keys are automatically programmed upon proceeding to the desired option and selecting it. These programming options are: ¨ option 1 (extension numbers) ¨ option 2 (line numbers) ¨ option 3 ...
Page 34
26 option 3 1.Key func1 cp 00 func2 cp 12 9.Key func1 cp 06 func2 cp 18 2.Key func1 cp 01 func2 cp 13 10.Key func1 cp 07 func2 cp 19 3.Key func1 cp 02 func2 cp 14 11.Key func1 cp 08 func2 cp 20 4.Key func1 cp 03 func2 cp 15 12.Key func1 cp 09 func2 cp 21 5.Key func1 cp 04 func2 cp 16 13.Key func1 cp...
Page 35
27 reminder ¨ with message: following the entry of the reminder time in “hhmm” format, a message with maximum duration of 30 seconds could be recorded without waiting for any notification signal. Whenever the reminder is active, the reminder tone is received from the telephone. In the meantime, the ...
Page 36
28 ¨ when with handsfree is selected, the telephone is picked up through the headset while it is on hook, by the fast handsfree key. Upon pressing it again, the headset is turned off and the telephone gets into the hf mode.The hf is switched off and the conversation ends, in the third use of the key...
Page 37
29 return factory set. With this facility, you can return back to the original settings of your telephone: the language will be set to turkish and the keys are automatically programmed as option1. Before the original settings are applied, the confirmation of the user is required. Backlight ¨ with le...
Page 38
30 phone security operations of defining / changing passwords, which are required in order to make use of features such as making calls or listening to messages through another extension within one’s own authorization limits, can be carried out through this upper menu item. Submenu titles: · passwor...
Page 39
31 message it appears only when there is an installed evm module (and dram module for the two- channel evm.) submenu titles: absent message o read message · message listen o all messages § message § password= (if password has been defined) o new messages § message § password= (if password has been d...
Page 40
32 phone book a phone book of 60 entries in total can be created by using this upper menu item. 16 characters are reserved for the entry of name/number into the phone book. In the event that any information of call, conversation, missed call, hold, park or forwarding that is related to a number stor...
Page 41
33 ¨ find by number: by using this menu, the user enters a number and carries out the find operation. In case no record that matches the entered number is found, the telephone set presents the entry within the records, which comes first with respect to the alphabetical order of their first letters. ...
Page 42
34 delete the submenus “find by name” and “find by number” are located within this menu. The entry to be deleted is found by using search menus, as described above. When the searched entry is found, while the records are being displayed, the query “delete?” is also displayed. The user accomplishes t...
Page 43
35 system settings only the system supervisor is authorized to use this menu. That is, this menu is displayed only on fts that are employed as the operator telephone and some special operations can be carried out via this upper menu option. Submenu titles: · setting time o time= · setting date o dd/...
Page 44
36 common pool entry ¨ in the register no section, ft15 primarily prompts the operator for the common pool number. Then the operator enters it. That number should be of 2 digits in the range 0-99 for ft15. The number does not need to start with line access code. ¨ no: itprompts the operator for the ...
Page 45
37 appendix error messages 1) in case the user starts to enter an incorrect access code, s/he can obtain [error] information by entering a number that does not exist in the system, so that s/he could have the opportunity to enter the access code again after pressing the ‘enter’ key. 2) the system ta...
Page 46: 4 Line Display Feature
05/2010 4 line display feature telephone set technical reference and user guide.