Karel IP116 User Manual - page 15
7
DSS Keys
These keys are used for various functionalities such as call /Line appearance Button, Speed
dial, Intercom, Pickup, Hold, Transfer, etc. If not stated the adjacent LED will light when the
assigned functionality is turned on.
Dial Pad
Use the DTMF hard keys to enter numbers, letters and special characters. Depending on the
selected input mode, you can enter digits, lower / upper case or special characters.
Navigation Keys
Use the navigation keys to navigate in the display menus and confirm/cancel actions.
Audio Device Control Keys
Use the audio device control keys to perform the following actions depending on your phone
type:
:
Adjust the volume of the handset, headset, speaker,ring tone and signal
tone;
: Allows for hands-free communication during calls;
Press to switch to the Group Listening mode.
: Place and receive calls through an optionally connected headset. The LED will be on
when the phone is in Headset mode;
:Mute audio transmission locally during calls;
Hard Feature Keys
: Allow users to access the voicemail directly;
: Enable setup of a local 3-way conference;
: Place a call on hold or resume it;
: During a call, press to transfer the current call to the third party;
When the phone is idle, press to enter the forward configuration page.
: Press to enter the Dialed Calls interface and choose a record to dial out.