Karel NT62I Technical Reference And User's Manual - page 19
NT62I Technical Reference and User Guide
11
To activate NT62I telephone set's network interface, firstly;
- IP
Type
- IP
Address
- Netmask
-
Gateway definitions must be done.
There are two options for IP type:
Static IP: User can adjust IP address and Subnet Mask manually.
DHCP: DHCP server makes all necessary network adjustments automatically.
After selecting IP type as Static, then make the adjustments listed below:
- IP
Address
- Netmask
- Gateway
Please ask your company’s authorized person about IP settings that are
made.
After entering IP address, Netmask and Gateway addresses, press “Accept“ to
save these addresses.
Other adjustments can be made easily by using special web interface for NT62I.
Adjusting other settings with using web interface will be told at the rest of user
guide.