Karel NT62I Technical Reference And User's Manual - page 23
NT62I Technical Reference and User Guide
15
Status
This field's value will indicate the current status of SIP Account.
Registration
This option must be “Activated” to make conversations over SIP server or IP
PBX using this account. When user registered to server, s/he can make
connections with analog and digital extensions and use services that server
supports.
If this option is selected as “Deactivated” and no other accounts are “Activated”,
user of NT62I can only make IP – IP conversations.
Default Account
If this option is checked for an account it means that account will be used as
default SIP account during outgoing calls.
Account Name
Name of the account. This field can be anything giving information about
account.
Domain
This part is used for defining SIP servers' or PBX’s IP address or URI.
Port
This part is used for entering the SIP Servers' port number which telephone will
use for SIP communications. This number should match the SIP Servers'
signaling port. Port may be between 1024 and 65535. Default value is 5060.
User ID
This part is used for entering user’s account information.
Authorization Name
This part is used for entering SIP Authorization ID.
Password
This part is used for entering SIP Password.
Display Name
This part is used for entering the name which will be shown at the remote
phones screen during calls.
Registration Expire Time
At this part the value of time is selected. This time shows the intervals (in
seconds) to send “Keep alive” to SIP Server. Minimum is 10 sec. and maximum
is 655535 sec. Default value is 60 sec.