Karel OP50 Technical Reference And User's Manual - Follow Me Key:
OP50 Technical Reference and User Guide
9
•
Follow Me Key:
If this key is pressed and then if number of an extension is
entered, then forwarding to that extension is actualized and then red LED lights. If it is
pressed again, then the forwarding is cancelled and the LED goes out.
•
Call Back Key:
If a called extension is busy or not answering and if busy tone is
received upon attempting to access a line, then that extension/line is called back by
pressing this key. In order to cancel the call back operation, the key is pressed again.
•
Do Not Disturb Key:
It puts that extension into the “Do Not Disturb” mode if it is
pressed and the red LED starts to blink. In that case, telephone rings once when the
extension is called. If it is pressed again, then the “Do Not Disturb” service is cancelled
and the LED goes out.
•
Telephone Lock Key:
If this key is pressed and the password that have been
defined before in Phone Security>Password menu, is entered afterwards, then the
telephone will be closed for external calls. The telephone will be open for external calls
again, if the procedure is repeated in that mode. The corresponding red LED is on
while the telephone is locked and goes out when it is unlocked.
•
Conference Key:
During a call with an extension or line, this key is employed for
including another extension or line into the conference. If a line is desired to be
included into the conference, the line with which the conversation is going on is put on
hold by pressing this key and one proceeds to conversation status with the line to be
included into the conference. A triple conference is established upon pressing this key
again. (At the time of conference the “Mute” key can be used in order to provide the
interruption of the outgoing voice.) During the conference, using the "Leave" option on
the screen with "Enter" key or replacing the handset provides extension to leave the
conference. But this case does not end the conversation between the other two
people.
•
Night Mode Key:
It can be employed only through the telephones that have been
defined as the operator. It puts the system into the Night Mode when it is pressed and
the LED will be turned on. If it is pressed again, then it puts the system into the Day
Mode and the LED goes out. (For this service only, the "Cancel" option is not available
after pressing the “Delete” key.)
• Auto Dial Key:
The telephone automatically calls the corresponding number when
the auto-dialer is activated. If the called party is busy, then the calling action is
performed repeatedly in every 15 seconds. As soon as the business of the opposite
party is over, the telephone notifies that by ringing itself or by short beep.
If it is
pressed again, then the auto-dial is cancelled and the LED goes out.
• Message Key:
If there is an EVM module placed on the system and a voice
message is left to the extension, the LED of this message key will blink to inform the
extension a new message left. All voice messages left to you can be listened
successively if this key is pressed. If a password has been defined before, a message
“Please enter your password” will be displayed when the message key is pressed.
After entering the password the voice messages can be listened. Also a mesage can
be left to the busy or unanswered extension with this key.