Karmann Ontario Operating Instructions Manual - Gas Installation
Temperature control
The refrigerator needs a few hours to
achieve its normal operating
temperature. When the refrigerator is
full the cooling time is longer.
In 230 V mode knob B is used for
control purposes.
Once operating temperature has
been reached, the controller can be
turned back to a middle position.
In gas mode knob B is also turned
back to a middle position after
operating temperature has been
reached.
Door lock
To prevent the refrigerator door from
being opened during travel, it is fitted
with an interlock (C). The picture
shows the door when locked. To
open, slide the lock to the left.
If the refrigerator is taken out of
service for an extended period, open
the door a little way and place the
interlock switch in the middle
position. This will keep the door ajar
to prevent the formation of mould.
You will find instructions for cleaning
the refrigerator in our "care tips" on p.
9-2.
Further details can be found in the
operating instructions accompanying
the refrigerator.
D
GAS INSTALLATION
D
5-9
Refrigerator
General instructions
Where possible, use precooled
foods.
Start the refrigerator up a few
hours before you start your journey
to get it down to operating
temperature.
Food and drinks should only be
kept in tightly sealed containers in
the cooling compartment.
Evaporating liquid will help cause
the cooling ribs to ice up.
You can prevent any knocking
noises during travel by stuffing
screwed-up paper between the
containers.