1. DL manuals
  2. Kasda
  3. Wireless Router
  4. KW5212
  5. User Manual

Kasda KW5212 User Manual

Other manuals for KW5212: User Manual
Manual is about: Wireless VDSL Router

Summary of KW5212

  • Page 1

    Kasda networks inc. 深圳市宏成数字科技股份有限公司 kw5212 wireless vdsl router user manual.

  • Page 2

    Wlan vdsl router user manual notice this document contains proprietary information protected by copyright, and this manual and all the accompanying hardware, software, and documentation are copyrighted. All rights are reserved. No part of this document may be photocopied or reproduced by mechanical,...

  • Page 3

    Wlan vdsl router user manual content 1 overview ............................................................................................................................... 1 1.1 f eatures ...............................................................................................................

  • Page 4: 1 Overview

    Wlan vdsl router user manual 1 1 overview thank you for choosing our product. The product is a wireless vdsl router combining an vdsl modem, an 802.11n wireless router ,a 4-port switch and an usb port in one unit, bringing high-speed wireless internet connection to a home or office. 1.1 features 1.1...

  • Page 5

    Wlan vdsl router user manual 2  ip static routing  routing information protocol (rip, ripv2)  network address translation (nat)  virtual server, port forwarding  dynamic host configuration protocol (dhcp)  dns relay, ddns  igmp proxy  simple network time protocol (sntp)  vpn pass-through (i...

  • Page 6

    Wlan vdsl router user manual 3  dmz 1.1.7 management support  web based gui  upgrade or update via ftp/http  command line interface via telnet  diagnostic test  firmware upgradeable for future feature enhancement 1.1.8 operating system support  windows 98/98 se/me/2000/xp/vista/7  macintosh ...

  • Page 7

    Wlan vdsl router user manual 4  subscription for adsl service. Your adsl service provider should provide you with at least one valid ip address (static assignment or dynamic assignment via dial-up connection).  one or more computers, each contains an ethernet 10/100m base-t network interface card ...

  • Page 8: 2 Hardware Description

    Wlan vdsl router user manual 5 2 hardware description front panel led color function green on: power on off: no power green on: lan link established and active via lan port blinking: dsl data activity occurs off: no lan link via lan port wlan green on: the wireless module is ready and idle blinking:...

  • Page 9

    Wlan vdsl router user manual 6 rear panel side panel wifi button: enable or disable wireless function. Reset button: system reset or reset to factory defaults. Wps button: a convenient way for wps set. Port function dsl connect the device to an dsl telephone jack or splitter using a rj-11 telephone ...

  • Page 10: 3  Hardware Installation

    Wlan vdsl router user manual 7 3 hardware installation this chapter shows you how to connect router. Meanwhile, it introduces the appropriate environment for the router and installation instructions. 1. Using a telephone line to connect the dsl port of router to the modem port of the splitter, and u...

  • Page 11

    Wlan vdsl router user manual 8 4 pc configuration guide 4.1 local pc configuration in windows 95, 98, me, xp,7 1. In the windows task bar, click the “start” button, point to “settings”, and then click “control panel”. 2. Double-click the “network” icon. 3. On the “configuration” tab, select the tcp/...

  • Page 12

    Wlan vdsl router user manual 9 5 web-based management guide in order to use the web-based management software it will be necessary to use a computer that occupies the same subnet as the router. The simplest way to do this for many users will be to use dhcp server that is enabled by default on the ro...

  • Page 13

    Wlan vdsl router user manual 10 we can select wizard setup or advanced setup mode to setup kw5212.The wizard set up will guide us for a basic setting,and the advanced setup will guide us to home page for more detailed setup. 5.2 internet access configuration 5.2.1 adsl setup from home page, you can ...

  • Page 14

    Wlan vdsl router user manual 11 4. Click add to select a layer 2 interface for this service and then click next. 5. Choose wan service type, just choose pppoe for example here. You can enter your own service description here if you want and then click next. 6. Input ppp username & ppp password and t...

  • Page 15

    Wlan vdsl router user manual 12 pppoe service name can be blank unless your internet service provider gives you a value to enter. Authentication method is default to auto. It is recommended that you leave the authentication method in auto, however, you may select pap or chap if necessary. The defaul...

  • Page 16

    Wlan vdsl router user manual 13 the gateway can be configured to disconnect if there is no activity for a specific period of time by selecting the dial on demand check box and entering the inactivity timeout. The entered value must be between 1 minute and 4320 minutes. Use static ipv4 address: if th...

  • Page 17

    Wlan vdsl router user manual 14 8. Get dns server information from the selected wan interface or enter static dns server ip addresses. If only a single pvc with ipoa or static mer protocol is configured, you must enter static dns server ip addresses. 9. Make sure that the settings below match the se...

  • Page 18

    Wlan vdsl router user manual 15 5.2.2 vdsl setup from home page, you can find advanced setup option on the left router configuration page. 1. From layer2 interface, click ptm interface. You can set it up according to the following steps. You choose add, or remove to configure dsl ptm interfaces. 2.C...

  • Page 19

    Wlan vdsl router user manual 16 6. Input ppp username & ppp password and then click next. The user interface allows a maximum of 256 characters in the user name and a maximum of 32 characters in the password..

  • Page 20

    Wlan vdsl router user manual 17 pppoe service name can be blank unless your internet service provider gives you a value to enter. Authentication method is default to auto. It is recommended that you leave the authentication method in auto, however, you may select pap or chap if necessary. The defaul...

  • Page 21

    Wlan vdsl router user manual 18 lan can be connected to the remote, since the dhcp server within the adsl gateway has only a single ip address to assign to a lan device. Napt and firewall are disabled when this option is selected. The gateway becomes the default gateway and dns server to the compute...

  • Page 22

    Wlan vdsl router user manual 19 9. Make sure that the settings below match the settings provided by your isp. Click on the apply/save button to save your configurations. 5.2.3 router mode setup 1. From advanced setup, click layer2 interface and select eth interface. Before you configure eth wan inte...

  • Page 23

    Wlan vdsl router user manual 20 3. Select a eth port as you will. You can select enet1, enet2, enet3 or enet4 port as the wan interface and default mode as connection mode. 4. Click apply/save and you’ll see the following screen. 5. From advanced setup, click wan service to configure a wan service o...

  • Page 24

    Wlan vdsl router user manual 21 8. Enter the user name and password that your isp has provided to you. Click next..

  • Page 25

    Wlan vdsl router user manual 22 pppoe service name can be blank unless your internet service provider gives you a value to enter. Authentication method is default to auto. It is recommended that you leave the authentication method in auto, however, you may select pap or chap if necessary. The defaul...

  • Page 26

    Wlan vdsl router user manual 23 enable full cone nat: in full cone nat, all requests from the same private ip address and port are mapped to the same public source ip address and port. Someone on the internet only needs to know the mapping scheme in order to send packets to a device behind the vdsl ...

  • Page 27

    Wlan vdsl router user manual 24 the gateway becomes the default gateway and dns server to the computer through dhcp using the lan interface ip address. The gateway extends the ip subnet at the remote service provider to the lan computer. That is, the pc becomes a host belonging to the same ip subnet...

  • Page 28

    Wlan vdsl router user manual 25 11. Make sure that the settings below match the settings provided by your isp. Click on the apply/save button to save your configurations and reboot the adsl router. 5.2.4 lan settings from lan, configure the dsl router’s ip address and subnet mask for lan interface. ...

  • Page 29

    Wlan vdsl router user manual 26 item description ip address this is the ip address that other devices on your local network will use to connect to the modem. Subnet mask this defines the size of your network. The default is 255.255.255.0. Enable igmp snooping igmp snooping is a method that actually ...

  • Page 30

    Wlan vdsl router user manual 27 5.3 wireless setting 5.3.1 basic option description enable wireless a checkbox that enables or disables the wireless lan interfaces. The default is to enable wireless communications. Hide access point select hide access point to protect the adsl route access point fro...

  • Page 31

    Wlan vdsl router user manual 28 (ssid) kasdaxxxx (xxxx means the mac address of kw5212 with uppercase and without colon) . All wireless clients must either detect the gateway or be configured with the correct ssid to access the internet. Bssid displays the gateway's wireless mac address. (user may n...

  • Page 32

    Wlan vdsl router user manual 29 3.Enable wps as below. Click save/apply 4.. Now you can use a wireless adaptor with wps function and the wps button to connect kw5212 to access the internet. 5. To configure security features for the wireless interface, please open security item from wireless menu. Th...

  • Page 33

    Wlan vdsl router user manual 30 the wireless security page allows user to configure the security features of user’s wireless network. There are several security methods to choose from, depending on user’s needs and the capabilities of user’s wireless machines. Wep open and wep shared —wep is an encr...

  • Page 34

    Wlan vdsl router user manual 31 wpa — wpa is a more recent encryption method that addresses many of the weaknesses in wep. Any client capable of wpa encryption should use it instead of wep. Wpa (psk) — this is wpa encryption combined with a pre-shared key (psk), which is a text string known only to ...

  • Page 35

    Wlan vdsl router user manual 32 3. Select “network printer” and click “next”. 4. Select connect to a printer on the internet, type “http://192.168.1.1:631/printers/printer” and click “next”. The printer name “printer” must be the same name entered in the adsl router “print server setting” as in step...

  • Page 36

    Wlan vdsl router user manual 33 5. Select driver file directory on cd-rom or in your hard disk and click “ok”. 6. Choose “yes” or “no” for default printer setting and click “next”. 7. Click “finish”. 6. Qos setup qos helps you to control the data upload traffic of each application from lan (ethernet...

  • Page 37

    Wlan vdsl router user manual 34 quality of service: check to activate this function and the following field will be available. Select default dscp mark: select the default dscp mark from the list-box. Differentiated services code point (dscp) is the first 6 bits in the tos byte. Dscp mark allows use...

  • Page 38

    Wlan vdsl router user manual 35 interface: the queue interface. Scheduler algorithm: the qos scheduler algorithm, sp(strict priority) or wfq(weight fair queuing) precedence: the priority identification. Weight: the weight value, 1-63. The highest is 63. Ptm priority: the ptm priority, normal or high...

  • Page 39

    Wlan vdsl router user manual 36 parameters traffic class name: assign a name for this class to uniquely identify the others among multiple classes. Rule order: select the priority for this class rule. Rule status: select enable to activate this class rule. Specify classification criteria the followi...

  • Page 40

    Wlan vdsl router user manual 37 classification criteria. The format should be xx:xx:xx:xx:xx:xx source/destination mac mask: mac mask is similar to ip mask, and the format also should be xx:xx:xx:xx:xx:xx. It is used to hide some information of the mac address. ‘1’,means needed and ‘0’ means ignored...

  • Page 41

    Wlan vdsl router user manual 38 2. In qos classification setup page, click add to add a qos classification. Then in the appeared add network traffic class rule page, enter the information to set up a rule. 1) specify the rule name, rule order, and rule status. 2) specify the classification criteria....

  • Page 42

    Wlan vdsl router user manual 39 3) specify the classification results. Here you must assign classification queue. Whether the following parameters are needed is according to your needs. If you do not want to change the original information, please leave it empty. The queues listed here in the assign...

  • Page 43

    Wlan vdsl router user manual 40  wan to lan ip qos 1. Here we take wan to lan (eth1) qos for example. Make sure there are enabled port eth1 based queues here. Lan queues need your configuration. You can enable wireless to enable wmm queues by default or add eth0-eth4 ported based queues manually. 2...

  • Page 44

    Wlan vdsl router user manual 41  port based qos take port eth0 to wan qos for example. 1. First make sure there is at least a wan queue and it is enabled. 2. In qos classification setup page, click add to add a qos classification..

  • Page 45

    Wlan vdsl router user manual 42 then in the add network traffic class rule page, enter the information to set up a rule to your needs. To assign classification queue, select the needed wan queue. 3. Click apply to save your settings and the added rule will be listed as below..

  • Page 46

    Wlan vdsl router user manual 43 appendix : frequent asked questions q: none of the leds are on when you power on the adsl router? A: please make sure what you use is the power adaptor attached with the adsl router package and checks the connection between the ac power and adsl router. Q: dsl led doe...

  • Page 47

    Wlan vdsl router user manual 44 q: pc cannot browse internet web page? A: please make sure dns server appointed to the pc is correct. You can use ping application program to test whether the pc can connect to the dns server of the adsl operator. Q: initialization of the pvc connection failed? A: be ...