Hd400 hi-definition 2.1 stereo speaker system user guide hd400 user manual.Indd 1 8/13/15 5:22 pm.
Fcc statements caution: this device complies with part 15 of the fcc rules / industry canada license-exempt rss standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including ...
Important safety instructions danger exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably to noise induced hearing loss but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The u.S. Government’...
Important safety instructions french danger l‘exposition a des niveaux eleves de bruit peut provoquer une perte permanente de l’audition, chaque organisme humain reagit differemment quant a la perte de l’audition, mais quasiment tout le monde subit une diminution de i’acuite auditive lors d’une expo...
Inputs 1 and 2: 1/4-inch input jacks (l and r). When using a mono signal, plug into the l jack xlr input 3: this xlr input is designed for low-impedance microphones or equipment that has a mic- level, balanced output. (not intended for line level signals, as distortion may occur.) volume control for...
Left & right ¼-inch outputs: satellite speakers are connected here. Left & right xlr outputs: sends signal to a mixer or other device. Direct out volume: sets the left/right output level to a mixer or other device. Direct out mono/stereo switch – allows for either output, signal present on both conn...
Hd400 specifications output power (rms 1%) 400w/4 Ω × 1 15-inch internal speaker 500mw/32 Ω × 2 output to headphones (stereo mix) 2 × 50w/8 Ω × 2 satellite speakers frequency response system: 45-15khz subwoofer: 45hz - 150hz continuous spl: 124 db peak spl: 127 db satellite(s): 150hz-15k continuous ...
