KAT HD400 User Manual - page 7
HD400 Specifications
Output Power (RMS 1%)
400W/4 Ω × 1
15-inch Internal Speaker
500mW/32 Ω × 2
Output to Headphones (Stereo Mix)
2 × 50W/8 Ω × 2
Satellite Speakers
Frequency Response
System: 45-15KHz
Subwoofer: 45Hz - 150Hz
Continuous SPL: 124 db
Peak SPL: 127 db
Satellite(s): 150Hz-15K
Continuous SPL: 117 db
Peak SPL: 120 db
Actual response is tailored for accurate
acoustic response for electronic drums
Hum and Noise
-55 dBV
All controls turned down
-50 dBV
All controls turned halfway
Input Impedance
10K Ω
All inputs
Input Levels
-16 dBV
INPUT 1 to achieve full output
-10 dBV
INPUT 2 to achieve full output
-10 dBV
AUX to achieve full output
-10 dBV
⅛-inch line to achieve full output
Line Out
0 dBV
Post Input 1, 2 Aux in. Pre EQ,
3.5mm line in
Tone Controls (EQ Centers)
60Hz, 800Hz, 10kHz
3 band, 12 dBV, Center Flat
AC Power Requirements
600 W
At full output
26 W
At idle
(All measurements made at 1 kHz, EQ Controls flat and volumes Max.)
KatPercussion.com
All specifications are subject to change without notice.
Subwoofer Dimensions
23.82" H × 18.62" W × 16.22" D
605mm H x 473mm W x 412mm D
Weight: 59lbs / 27kg
including feet
Satellite Dimensions
13.0" H × 8.75" W × 8.58" D
330.2mm H x 222.25mm W x 218mm D
Weight: 10lbs / 4.54kg
including feet
HD400 User Manual.indd 8
8/13/15 5:22 PM