Important read carefully before use instructions for use ufs 800 english.
2 of 40 2 of 40 list of contents 1 about these instructions ................................................................................4 1.1 contents ........................................................................................................................4 1.2 markings .............
3 of 40 3 of 40 4.5 settings .......................................................................................................................33 4.5.1 system settings ...........................................................................................................33 4.5.2 osd setup ....
4 of 40 4 of 40 about these instructions 1 about these instructions 1.1 contents these instructions for use contain the following information: ● first installation of extended satellite reception systems (2, p. 7) ● operation of the live tv/radio and program guide (3, p. 8ff) ● settings on the main ...
5 of 40 5 of 40 1.2.2 symbols general warning sign tip instruction for installation or operation of the unit, or for use of the instruc- tions risk of damage to property 1.2.3 signal words the signal words are used in conjunction with the symbols shown above: warning this signal word indicates a haz...
6 of 40 6 of 40 about these instructions lnb the lnb (low noise block converter) is located at the focal point of a satel- lite antenna. The lnb converts the satellite frequencies into lower frequencies which can be processed by a satellite receiver. Ntfs ntfs (new technology file system) is a propr...
7 of 40 7 of 40 2 first installation of extended systems important the descriptions in this document assume that the device has been correctly connected in accordance with the quick start guide supplied. Tip the connection of optional kathrein components for extended systems is described in the inst...
8 of 40 8 of 40 operation 3 operation tip ● the lower screen area always shows current operating instructions ( ① in fig. 1) ● the operating instructions in this document are shown in either the short form or long form. Short form ▷ step 1 ▶ step 2 ▶ step 3 ▶ ... For example: ▷ menu ▶ settings ▶ par...
9 of 40 9 of 40 3.1 operating functions on the unit if the remote control is unavailable the receiver can be operated with limited functionality using the buttons on the front of the unit (tab. 1). Functions that are password-protected cannot be operated using these buttons, since they require numer...
10 of 40 10 of 40 operation 3.3.1 select a satellite/channel and display videotext 18 17 16 5 15 6 14 13 12 10 8 9 6 4 1 2 3 7 11 fig. 2: remote control ✔ the receiver displays live tv/radio where appro- priate. Select a channel using the numeric buttons d) ► press a numeric button ⑫ (fig. 2) to sel...
11 of 40 11 of 40 select a channel from the favourites list 1. Press fav ⑧ to open the favourites list (fig. 3). 2. If necessary, press pause ② to switch between the favourites list and the channel list. 3. Press p+/− and vol+/− to select a channel. 4. Press ok to show the selected channel c) . 5. P...
12 of 40 12 of 40 operation e b a c c d fig. 4: on-screen keyboard and results list show videotext 1. Press text ④ to open the videotext. ➯ videotext page 100 is displayed. 2. Use the numeric buttons to input the 3-digit number of a videotext page or use p+/− or page+/− to switch to the next/previou...
13 of 40 13 of 40 vol+ /− to switch between the current and following programme. 4. Press exit to close the comprehensive channel information. 5. Press exit again to close the compact channel information. 5 13 12 11 10 9 8 7 6 2 1 16 15 14 3 4 fig. 5: compact channel information ① next programme ⑨ e...
14 of 40 14 of 40 operation 3.3.3 display of programme information in the epg the electronic program guide (epg) provides a daily and weekly view. The epg button opens the epg, the epg/exit button closes it. Zoom switches between the daily and weekly view (fig. 7 and fig. 8). Weekly view features ● ...
15 of 40 15 of 40 daily view features ● preview of the selected channel ( ① in fig. 8) ● display of channels ② and the programmes ③ for the current day ● display of detail information on the programmes ④ ● manually calls up the programme information for the selected channel operating functions a) ● ...
16 of 40 16 of 40 operation 3.3.4 changing the tv picture settings ✔ live tv/radio (current programme) is displayed. 1. Press the numeric button 0. ➯ the color menu appears. 2. Press p+/− to a) select a tv picture feature and change its value using vol+/−; changes are displayed immediately. B) selec...
17 of 40 17 of 40 4 main menu tip the following comments apply to this chapter: ● the descriptions assume that you have available an operational receiver with a tv set on which you can perform the functions that are described. ● the following buttons must be pressed as standard. Their operation is t...
18 of 40 18 of 40 main menu 4.2 overview of the main menu installation, p. 19 edit channels, p. 29 settings, p. 33 times, p. 36 network, p. 38 receiver info, p. 39 antenna settings, p. 19 tv channels, p. 29 system settings, p. 33 time settings, p. 36 usb, p. 38 about stb, p. 39 scan, p. 23 radio cha...
19 of 40 19 of 40 4.3 installation tip ● gather information about the characteristics of your satellite system before you change the settings in the installation menu. If required, call in the specialist who installed your system. ● information on the reception parameters of individual channels can ...
20 of 40 20 of 40 main menu lnb types "universal", "9750/10750" ... "5150" ... "11475" the upper and lower limit frequencies for these type of lnb are fixed. Lnb types ③ (fig. 10, p. 19) universal, 9750/10750, 5150/5750, 5750/5150, 5150, 5750, 9750, 10600, 10700, 10750, 11300, 11475 lnb power ④ type...
21 of 40 21 of 40 lnb types "user single" and "user dual" these lnb types allow the limit frequencies to be set individually. Lnb types ③ (fig. 10) user single, user dual lowlnbfreq lower limit frequency of the lnb 1) highlnbfreq upper limit frequency of the lnb 1) 2) lnb power ④ see description on ...
22 of 40 22 of 40 main menu lnb types "unicable a", "unicable b", "unicable c" (single-cable system) lnb types ③ (fig. 10) unicable a (= satellite 1), unicable b (= satellite 2), unicable c (= satellite 3)etc. If channel transmission channel center freq either a predefined transmission frequency can...
23 of 40 23 of 40 4.3.2 scan ▷ live tv/radio ▶ menu ▶ installation ▶ scan satellite scan performs a channel scan for a freely selectable satellite. Search mode and network search can be set for this purpose: scan mode the type of channels to be scanned (all channels, free-to-air (fta) channels, hd c...
24 of 40 24 of 40 main menu 1 2 fig. 12: satellite scan.
25 of 40 25 of 40 transponder channel scan performs a channel scan for freely selectable transponders on a freely selectable satellite. Search mode and network search can be set for this purpose; see satellite scan, p. 23. Performing a transponder channel scan 1. Select transponder scan. ➯ the multi...
26 of 40 26 of 40 main menu 4.3.3 satellite manager ▷ live tv/radio ▶ menu ▶ installation ▶ satellite manager ➯ if required, the settings for the satellites in the satellites list can be edited (change posi- tion/name, add/delete satellites). 4.3.4 tp manager ▷ live tv/radio ▶ menu ▶ installation ▶ ...
27 of 40 27 of 40 move steps [1] east rotates the polar antenna step by step towards the east (clockwise) until stop is selected. West rotates the polar antenna step by step towards the west (anti-clockwise) until stop is selected. Stop stops the rotational movement. Go to xx(-7.5) 3) move the satel...
28 of 40 28 of 40 main menu 4.3.6 usals setup ▷ live tv/radio ▶ menu ▶ installation ▶ usals setup ➯ enter a reference position for your usals-capable motorised antenna, as described in the user instructions for the motorised antenna. Longitude direction east the instantaneous location is east of the...
29 of 40 29 of 40 4.4 edit channels ▷ live tv/radio ▶ menu ▶ edit channels 4.4.1 tv channels ▷ live tv/radio ▶ menu ▶ edit channels ▶ tv channels basic procedure for changing the channel list for tv channels 1. Open the tv channels window (see above for the operating path). ➯ selection mode is switc...
30 of 40 30 of 40 main menu delete channel(s) from the channel list 1. In selection mode, select the delete function, then press ok. ➯ application mode is now switched on. 2. Use p+/− to select the channel to be deleted. 3. Press ok. ➯ the channel to be deleted is marked with a tick. 4. If required,...
31 of 40 31 of 40 4.4.3 tv favourites ▷ live tv/radio ▶ menu ▶ edit channels ▶ favourites the tv favourites lists are intended to store an individually compiled selection of channels. This allows you quickly to call up your favourite channels. You can change the contents of your favourites list at a...
32 of 40 32 of 40 main menu 4.4.6 user channel list ▷ live tv/radio ▶ menu ▶ edit channels ▶ user channel list save channel list 1. Select save user data, then press ok. ➯ a dialogue window appears. 2. Use vol+/− to set the value yes, then press ok. ➯ the channel list will be saved accordingly in th...
33 of 40 33 of 40 4.5 settings 4.5.1 system settings ▷ live tv/radio ▶ menu ▶ settings ▶ system settings menu language language for the main menu and other menus and dialogue windows. ● changes are displayed immediately. ● the other language settings copy the setting for the menu language. Audio 1 p...
34 of 40 34 of 40 main menu channel name auto update on if the channel name is changed on the satellite signal, the change is automatically loaded into the channel list. Off changed channel names are not automatically loaded into the channel lists. 4.5.2 osd setup ▷ live tv/radio ▶ menu ▶ settings ▶...
35 of 40 35 of 40 settings lock yes the settings described under 4.5, p. 33ff are pass- word-protected. No password protection is switched off. Age rating channels for which the age rating is equal to or less than the age rating setting can be viewed only once the password has been entered. Change p...
36 of 40 36 of 40 main menu 4.6 times 4.6.1 time settings ▷ live tv/radio ▶ menu ▶ times ▶ time settings time mode auto the receiver takes the time information from the satellite signal. Manual the time must be set manually. Time offset 1) offset of the local time zone from gmt. Setting for germany:...
37 of 40 37 of 40 4.6.3 standby time ▷ live tv/radio ▶ menu ▶ times ▶ standby time the standby time is set directly with no need to open a sub-menu (ok ▶ vol+/− ▶ ok). On when in standby, the front display shows the time. Off when in standby, the front display does not show the time. 4.6.4 apd setti...
38 of 40 38 of 40 main menu 4.7 network 4.7.1 usb ▷ live tv/radio ▶ menu ▶ network ▶ usb loading a software update from the usb storage medium 1. Download a software update (zip file) from www.Kathrein.Com ▶ service ▶ downloads on to a pc. 2. Extract the zip file and save the *.Bin file it contains ...
39 of 40 39 of 40 4.7.3 network apps www weather ▷ live tv/radio ▶ menu ▶ network ▶ network apps ▶ weather ➯ use the coloured buttons to specify the location for the weather forecast and to view the forecast. ➯ the coloured button functions appear in the lower screen area. 4.8 receiver info 4.8.1 ab...
Www.Kathrein.Com kathrein-werke kg • anton-kathrein-strasse 1-3 • postfach 10 04 44 • 83004 rosenheim • germany • tel. +49 (0) 8031 184-0 • fax +49 (0) 8031 184-385 936.4801/-/vmwi/1014/de - technical data subject to change.