Kauo Heng KH-323 SERIES Operation manual - 2. Run

2. RUN 

  Fig.2-0 

Press     

2 

☉

Enter RUN mode, if the stepping motor is not at home position, it 

displays warning 【STEP ERROR】. You should go to the TEST mode, in 

STITCH function, you can test the stepping motor then come back to   

RUN mode.

☉

Enter Run mode, if the carriage does not stop at the left limit position, it 

 displays warning 【PLS MOVE CAM TO LEFT】. You have to move the   

carriage to the left limit position and start. 

 Fig.2-1 

Enter Fig.2-1, set the knitting file name, and then set system（carriages）is  

 for separation or        for combimation, STA（start needle）, END 

F4 

F2 

（

end needle）, T-PC（total pieces）, F-PC（finished pieces）, after setting 

press      to enter Fig.2-2. 

F1 

2-6