Kauo Heng KH-323 SERIES Operation manual - Error Message
ERROR MESSAGE
After you finish inputting the instruction for the program that occurs
incorrect action or wrong instruction to the function of machine, it will
automatically appear ERROR message on RUN mode.
Error message table
Message Explanation
To edit a program, the total lines of program
must be an even number. Otherwise the
carriage does not return to the left side to
proceed the next knitting piece.
Line not even
It is an error that the carriage carries a yarn
feeder when yot set carriage in an empty action
without yarn feeder.
Carrying feeder
2-8
None feeder（L）
When you set the action of knit, the carriage
has to carry a yarn feeder.
None feeder（R）
Before ending the program, the needle bed
must be racked back to the home position. In
case the program racks one level to the right, it
needs rack one level to the left back to the
home position before ending.
Rack error
Feeder 1 error
Feeder 2 error
Feeder 3 error
Feeder 4 error
Feeder 5 error
Before ending the program, the yarn feeder
must return to home position, Otherwise it is
impossible to proceed the next knitting piece.
Feeder 6 error
Repeat must be set in even lines of amount, for
example the start line is an odd and the end line
must be an even, or from an even to an odd.
（
From odd line to odd line or from even line
to even line are unacceptable.）
Repeat error
In racking, the maximum of knitting speed is
No.4.
Rack over speed
The number of start-needle must be smaller
than the number of end-needle.
Start-ndl error
The number of end-needle must be larger than
the number of start-needle, or smaller than the
number of total-needle.
End-ndl error
Tab.2-1 Error message table
Please correct the error of edited program according to the error message of
LCD display.