Kawai Expansion Kit Installation Manual - Step 6
Step 6
Remove any blank plates covering the newly populated connectors.
Remove as needed
8
6
5
4
7
1
2
3
Aux In
CD In
Rec Out Mon Out
Right
Left
Teacher Remote Ethernet
On/Off
Power
9VAC
Removing Blank Plate
Step 7
Replace cover and all screws.
Step 8
Replace all the cables that were unplugged at the beginning of this
installation. Make sure the power is still switched off.
Step 9
Place the new Student Boxes with the desired pianos. Plug one end of the
¼ inch patch cable into the headphone output on the piano and the other
end into the Student Box “Instrument In” connector. Plug the supplied
Student Headset into the Student Box “Headset” and “Mic” connectors.
For best operation, adjust the volume control on the piano to maximum
and adjust the trimmer on the side of the Student Box for a safe,
comfortable level in the student headsets.
Repeat until all Pianos are connected to a Student Box.