Kedacom IPC425 Quick Start Manual - page 14
Waterproof
For outdoor mounting, suggest applying wall mounting bracket whose beam has an upward angle.
If user uses self-selected bracket, suggest applying those waterproof brackets with female screw thread
connector. If user selects brackets with male screw thread, make sure of the waterproofness of the connecting
part between the bracket and the high speed dome camera.
The screw thread connector needs to be bound with thread seal tape to ensure the sealing tightness of screw
thread. When mount, align with the screw thread to avoid obvious deviation or slipping.
Anti-static, Anti-interference, Anti-thunder, Anti-surge
The camera should be grounded, or ESD may damage the electrical parts.
In thunder and lightning area, camera should be grounded nearby to release the heavy energy of thunder
strike so as to prevent camera from damage.
In area with unstable voltage, camera should be grounded to release the heavy energy of electrical surge so as
to prevent power source from burning.
Camera anti-thunder ground lead cannot replace safety ground lead. When apply poles with imperfect earth,
such as wooden pole and cement pole, camera should connect the safety ground lead to release leak current
so as to ensure the safety of camera or pole.
Camera anti-thunder ground lead must be grounded individually, other than being grounded through other
electrical device nearby.
Beam
with an
upward
angle
Beam
without crack or split
Beam
without crack or split
All
-in-one
beam
or pole
2