KEDDY Christineberg Installation Instructions Manual - page 7
- 5 -
4. Put in six element 3 pieces with matching gaskets,
note the vertical gasket.
Place round gasket spacers evenly distributed on all
sides, four spacers per course, twelve pieces in total.
Push the elements outwards against the safety case, so
the spacers are kept in place.
6. Put in the hearth's rear wall. Push it backwards and
centre it against the bottom plate.
5. Insert the hearth's bottom plate.
Arrow 1. Push the bottom plate's front edge under
the lower edge of the cast iron door.
Arrow 2. Push the bottom plate backwards until it
makes contact.
7. Put in the two lower horizontal side walls on each side
in the hearth.
Arrow 3. Push the side walls forwards from behind, into
the U section in the cast iron frame.
Arrow 4. Push the rear edges of the side walls outwards,
so that they meet the rear wall's stop edge.
Push the side walls backwards so that they
meet the rear wall.