Fireplace inserts installation instructions care and firing instructions model sk1000, sk2000
Contents contents.............................................................................................................................2 general information.....................................................................................................3 important points.....................
General thank you for choosing our fireplace insert! Keddy's fireplace inserts have a number of unique characteristics, for example: * flat-ground hatches * innovative selfclosing door * pre-heated combustion air * cast iron for long service life keddy fireplace inserts have the following accessorie...
Preconditions building notice building notice may be required for the installation of a fireplace insert. Contact the planning and building committee in your municipality for up-to-date infor- mation. Flue keddy's fireplace inserts may be connected to a flue approved for a minimum of 350°c. The fire...
- 5 - surround installation keddys fireplace can be used as a fireplace where you build your own surround around it or you in- stall it into an existing fireplace. We have gathered the nessecery measurements for building your own surround below. Before beginning the installation of an insert in an e...
1.Decide where the mineral woll sealing is to be pplaced in the chimney. If nessecery, clean the inside of the stove from soot or any loose mortar using a steelbrush. Measure the distance from the connection hole in the insert to the sealing point in the existing chimney. Apply the mineral wool imme...
4. It is now time to assemble the insert. Remove the box and the bottom plate from the firebox. If you want to disassemble the body and the front-door, open the door/doors max and unscrew the four bolts (see ill). Carefully pull the front towards you. (app weight of front and door mod 2001, 35 kg) i...
- 8 - installation guide alt. 2 1. Make a hole in the existing lintel in such a way that you can insert the pipe and insulation. (approximately 300 x 300 mm) 2. Fix the smoke outlet pipe to the insert and adjust the insert to be level with the adjustable feet. After this, assemble the flue pipe up t...
Care & firing instructions keddy's fireplace inserts have been tested by an approved testing and research institute. They have extremely good environmental values and a useful efficiency of 80%. For the fireplace insert to work optimally, it is of key importance that you follow the care and firing i...
Lighting a fire 1. Open the door using the fixed handle under the door frame. Lay kindling crosswise until you have a total quantity of wood of 1.5 kg (small insert) or 2,0 kg (large insert) (app 15 pieces). (see picture below). 2. Push the damper control as far to the right as it will go, place a c...
- 11 - technical specifications sk1000 height 470-475 mm width 500 mm depth 400 mm weight 100 kg flue pipe diameter 125 mm efficency 82% output 4-9 kw sk2000 height 535-540 mm width 600 mm depth 500 mm weight 125 kg flue pipe diameter 125 mm efficency 82% output 5-10 kw.
Www.Keddy.Se keddy ab box 542 441 15 alingsÅs tel. +46 (0) 322 781 80 fax +46 (0) 322 781 89 e-mail: info@keddy.Se website: www.Keddy.Se rev . 1, 01/09/2013.
