KeeLog 16 MB KeyGrabber Nano User Manual - Keygrabber Nano
KeyGrabber Nano
Copyright © 2013 KeeLog
11
Configuration options
The KeyGrabber Nano may be configured through the file CONFIG.TXT, placed in the Flash
Drive root folder. Use any text editor to prepare such a configuration file, containing the
following text:
Password=KBS
LogSpecialKeys=Medium
DisableLogging=No
Copy this file to the root folder in Flash Drive mode. The new configuration will be loaded on
next power-up.
The following list presents the most common configuration options. All variable and value
strings are case insensitive.
Password sets the 3-key combination for triggering Flash Drive mode. Any three-letter key
combination is allowed (sequence is irrelevant). The password setting is national-layout
independent. Default value is KBS.
LogSpecialKeys sets the logging level for special keys, such as Enter, Escape, F1...F12 etc.
Special keys are logged in brackets, i.e. [Ent]. Allowed values are None (only text is logged),
Medium (text with basic function keys are logged), and Full (text with all special keys are
logged). Default value is Medium.
DisableLogging allows to disable keystroke logging, however does not affect mode
switching. Allowed values are Yes (logging disabled) and No (logging enabled). Default value
is No.
DisableLayout allows disabling the currently loaded layout, without having to delete the
layout file. Allowed values are Yes (layout disabled) and No (layout enabled, if present).
Default is No.