KeeLog 16 MB KeyGrabber Nano User Manual - Keygrabber Nano
KeyGrabber Nano
Copyright © 2013 KeeLog
12
Encryption enables flash disk encrypting. Encryption will ensure full confidentiality of the
stored data, even if the device is physically tampered with. Allowed values are Yes
(encryption enabled) and No (encryption disabled). Default is No.
Important: toggling the encryption setting will format the entire flash disk. All data will be lost,
including the configuration and layout files!
An example configuration file contents is shown below:
Password=SVL
LogSpecialKeys=Full
Encryption=Yes
A full list of available parameters with descriptions is available below.
Basic parameter list
Parameter
Values
Example
Description
Password
3-character password
(default KBS)
Password=SVL
Three-character key combination for
activating Flash Drive mode.
LogSpecialKeys
None
Medium (default)
Full
LogSpecialKeys=Full
Special key logging level.
DisableLogging
Yes
No (default)
DisableLogging=Yes
Keystroke logging disable flag.
DisableLayout
Yes
No (default)
Menu
DisableLayout=Yes
National layout disable flag (see
section
National keyboard layouts
).
Advanced parameter list
(use only when you know what you’re doing!)
Parameter
Values
Example
Description
Encryption
Yes
No (default)
Encryption=No
Flash drive encryption setting
(caution: changing this value will re-
format the flash drive).
SupportReportProtocol
Yes
No (default)
SupportReportProtocol
=No
Report protocol support flag.
CheckShortFrame
No
Low (default)
Medium
High
CheckShortFrame=No
Short frame fast filter option.
CheckModifierByte
Yes (default)
No
CheckModifierByte=No
Modifier byte check flag.
FrameFilter
Filter value
(range 0…255,
default 98)
FrameFilter=226
Frame filter value.
KeyboardSpeed
Auto (default)
Full
Low
Mixed
KeyboardSpeed=Auto
USB keyboard speed setting.
CheckOverflow
Yes
No (default)
CheckOverflow=Yes
Overflow check flag.