19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 1 - 19" lcd open frame saw touch monitor ( ( ( ( the dust-proof type ) ) ) ) user guide rev2.0 model: kot-0190us-sa6bp shenzhen k&jad technology co., ltd www.Keetouch.Com dec. 2010
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 2 - table of contents chapter 1 introduction 1.1 product description ...................................................................................................................................3 1.2 about the product ........
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 3 - chapter 1 1 introduction 1.1 product description keetouch’s 19" lcd touch monitors have a long-lasting product cycle because the enclosure is controlled by keetouch’s specifications. Future panel improvements are therefore po...
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 4 - chapter 2 2 installation and setup this chapter discusses how to install your lcd touchmonitor and how to install the driver software. 2.1 unpacking your touchmonitor check that the following 9 items are present and in good c...
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 5 - or one power cable us/canada one european power cable 2.2 product overview main unit rear view side view bottom view 2.3 attaching the l-brackets note: you will need a screwdriver to attach the l-brackets. To attach the l-bra...
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 6 - option 1 (l-brackets to the left and right sides) option 2 (l-brackets to the up and down sides) 2.4 vesa mounting interface your touchmonitor conforms to the vesa flat panel monitor physical mounting interface (fpmpmitm) sta...
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 7 - note:do not penitrate the m4 screw into the monitor more than 5mm. 2.5 interface connection note: before connecting the cables to your touchmonitor and pc, be sure that the computer and touchmonitor are turned off. 1. Connect...
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 8 - note : : : : the touchmonitor should be integrated according to the above process, if not may result in the touchmonitor working abnormally 。 2.6 installing the driver software and calibration keetouch touchsystems provides d...
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 9 - after selecting the proper interface, click the install button to start installing the driver as following. Installation successfully as following: 2.6.2 calibration click at the right side in the down corner of the desk-top,...
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 10 - windows will pop-out the calibration interface, then click “+” with finger one by one, as follow: after clicking the “+” on by one, the calibration is completed..
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 11 - appendix a a technical specifications specification model no. Kot-0190us-sa6bp series ot structure metal-cased openframe and black medal dust-proof front bezel lcd type active matrix tft-lcd display size 19 "(diagonal) activ...
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 12 - power consumption 50w max. Mount interface 1)vesa 75mm and 100mm 2)mount bracket, horizontal or vertical (standard mount brackets are supplied) buttons auto,+,power,-,menu osd control function brightness, contrast ratio, aut...
19" lcd open frame saw tm (the dust t-proof type)user guide (rev2.0) - 13 - touch/video cables touch/video cables touch/video cables touch/video cables: detachable serial or usb touch cable,and video cables are included l l l l- - - -brackets brackets brackets brackets:two standard l-brackets are in...