Keiser m5 User Manual - Before Assembling
BEFORE ASSEMBLING
Always follow the steps in this manual as you assemble your M5 Strider. Do not skip,
substitute or modify any steps or procedures of this assembly, as doing so could result in personal
injury and will void your warranty. We have put a number of precautions in this manual.
A
B
G
F
C3
C1
D1
D3
D2
C2
D4
C3
C4
E
H
Pedal Mounts
Crank Arm
Transport Wheel
NOTE: Informs you about things we recommend you do or are aware of, before
performing the assembly. These notes are placed in the manual to aid you during a
certain procedure or to make you aware of any general mandatory actions or information.
WARNING: This symbol appearing throughout this manual means PAY ATTENTION! BE
ALERT! When you see this warning symbol, your safety is involved. It is being used to
call attention to POTENTIAL hazards that could result in personal injury or loss of life.
A
-
Handlebar Assembly (560809)
B
-
Handles (560810)
C
-
Loose Parts Pack #1
1. 8 Socket Button Head Cap Screws (M8X12) (9515)
2. 2 Hex Head Cap Screws (M8x80) (9518)
3. 18 Small 5/16 Washers (9369)
4. 2 Large 5/16 Washers (9344)
D
- Loose Parts Pack #2
1. 8 Black Rubber Caps (565058)
2. 8 Hex Head Cap Screws (M8x10) (9514)
3. 2 Socket Head Cap Screws (M8x12) (9513)
4. 2 Hex Head Cap Screws (M8x16) (9511)
E
- Loose Parts Pack #3
1. 2 Aluminum Caps Preassembled with O-Rings (565005)
F
- Hanger Pedal Mounts (560906)
G
- Top Frame (560808)
H
- Main Frame (560807)