Trekmill mm5050 contents user's manual serial number: date purchased: find the serial number in the location shown below. Serial number read the safety and comfort guide in this manual before using this equipment. Keiser corporation 2470 s. Cherry avenue fresno, ca 93706 usa tel : 559-256-8000 fax :...
Safety & comfort guide warning : to reduce the risk of burns, fire, electric shock, or injury to persons, read the following safety and comfort guide before operating the trekmill. 2 1. It is the responsibility of the owner to ensure that all users of the trekmill are adequately informed of all warn...
Console handrail key/clip walking belt roller adjustment bolts power cord cushioned walking platform foot rail before you begin read this manual carefully before using this product. 3 if you have questions after reading this manual, please call our customer service department at 1-800-888-7009 or 55...
Assembly requires two people. Set the trekmill in a clear area and remove all packing materials. Do not dispose of the packing materials until assembly is complete. Assembly requires the allen wrenches provided, a phillips screwdriver and a 13mm open-ended wrench. 4 1. Identify the right upright [1]...
5 assembly 3. Place a handrail [7] on each pipe [8] of the console [4]. Have a second person hold the handrail [7] in the position shown. Insert two long handrail bolts [9] into handrail through the upright. Next, insert four short handrail bolts [10] down the handrail [7] as shown. Tighten all of t...
Operation and adjustment 6 improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. Do not modify the power cord provided with the product. Use a transformer when the voltages between the trekmill and your facility do not match. When the manual mode...
Operation and adjustment 7 1. Attach the clip to the waistband of your clothing. Stand on the foot rails of the trekmill. Find the clip attached to the key and slide the clip onto the waistband of your clothing. Next, insert the key into the console. Test the clip by carefully taking a few steps bac...
Operation 1. Select the manual mode. When the key is inserted, the manual mode will automatically be selected, as shown by the manual indicator. If a preset program has been selected, press the select program button repeatedly until the manual indicator lights. 2. Press the start button. A moment af...
Operation 9 1. Getting into the present program. After inserting the key and the led is lit, you can select the program desired. 2. Select the desired preset program. The twenty trails shown in the trail display represent the twenty preset programs. As you press the select program button repeatedly,...
Operation 10 note: if you manually override either the grade or speed setting for the current segment, when that segment ends, the trekmill will automatically adjust to the grade and speed settings for the next segment. Because each program is based on a preset distance, if you manually increase the...
Maintenance 11 note: there is no need to adjust this product upon delivery. When using this product commercially, periodically lubricate the inside of walking belt with silicon oil. Most problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. ...
Maintenance the walking belt is off-center 1. If the walking belt has shifted to the right, first remove the key and unplug the power cord. Using the allen wrench, turn the left front roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful not to over ti...
Limited warranty 1. Keiser warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of one year from the date of purchase (running belt and motor belt for six months from the date of purchase). This warranty extends only to the ...
Keiser corporation 2470 s. Cherry avenue fresno, ca 93706 usa 1-800-888-7009 tel: (559)256-8000 fax: (559)256-8100 www.Keiser.Com service@keiser.Com.
