Keithley 8009 Instruction Manual - Specifications
1
1
2
5
8
8
9
9
11
11
11
12
13
13
15
17
21
21
21
Specifications
Operating Voltages:
1kV Peak Source (safety banana plugs supplied with 6517).
200V Peak Measure (triax, 3-lug).
200V Peak Common mode.
0.1A Peak Test Current.
1VA.
Volume Resistivity Range:
10
3
to 10
18
Ohm-cm.
Surface Resistivity Range:
10
3
to 10
17
Ohm.
Center Electrode:
50.8mm O.D. ± 0.05mm (2.0 in. ± 0.002 in.) conductive rubber pad.
Electrode Concentricity:
Within 0.01 in. of center of ring electrode.
Ring Electrode:
57.2mm I.D. ± 0.05mm (2.25 in. ± 0.002 in.).
Top Electrode:
85.7mm O.D. ± 0.05mm, (3.375 in. ± 0.002 in.), 54mm diameter (2.125
in.) conductive rubber pad.
Electrode Material:
Type #303 Stainless.
Pad Durometer:
70 Shore A.
Pad Resistivity:
Volume = 10¾/square max.
Sample Size (Min.):
63.5mm diameter (2.5 in.) (surface).
Sample Size (Max.):
101.6mm sq.
×
3.2mm thick (4 in.
×
0.125 in.).
Interlock:
4 pin for use with 6517.
Test Force:
Center Electrode:
6 lbs. min.; 1.9 psi, 13.2 kPa.
10 lbs max.; 3.2 psi, 21.9 kPa.
Ring Electrode:
2 lbs. min.; 9.3 psi, 64.1 kPa.
23 lbs. max.; 107 psi, 737.6 kPa
(dependent upon sample thickness).
Operating Temperature:
–30°C to +80°C.
Operating Humidity:
0% R.H. to 65% R.H. up to 35°C, linearly derate 3% R.H. per
degree above 35°C.
Dimensions:
107.95mm high
×
165.1mm wide
×
139.7mm deep (4.25 in.
×
6.5 in.
×
5.5
in.).
Weight:
1.45kg (3.19 lbs.).
Specifications subject to change without notice.
i