Kellyco Minelab X-Terra Quick Start Referen - page 15
22
Pass the coil across the objects, one at a
time, and observe the LCD and the detector’s
sounds as it detects each object.
Note: If you are getting signals from a clear patch of
ground, there may be unknown buried metal objects.
Before attempting to pinpoint or recover
real targets it is important to understand
how to interpret the audio and visual
responses correctly.
If the detector is making popping and
crackling sounds and displaying numbers
when the coil is not over one of the metal
objects, try reducing the detector’s sensitivity
(pg. 44).
Once stable, the detector will only
sound and display numbers when the coil
is passed over a target.
A good way to become familiar with
detecting is to test the detector against
a range of metal objects. This exercise
is a simple lesson on how the detector
interprets metal objects.
Gather a collection of diff erent metal objects,
e.g. various coins, gold and silver jewellery,
a rusted nail, pull-tab, brass button and
aluminium foil.
Take the detector outside, away from known
electromagnetic fi elds or metal objects.
Lay objects in a line, suffi
ciently spaced apart
to allow the coil to pass between the objects.
This test exercise can be used when
adjusting the detector’s settings (Sensitivity,
pg. 44, Volume, pg. 46, Noise Cancel*, pg. 48,
Ground Balance*, pg. 50)
The X-Terra 50 has additional ways
of stabilising the detector’s signals for
diff erent environments. (Noise Cancel*, pg.
48, Ground Balance*, pg. 50)
23
Don’t worry if the detector isn’t producing
a sound over the nail, this is because the
detector begins in the default pattern
1
,
a setting which rejects signals from common
junk targets.
The X-Terra coil is waterproof.
(Care of Your X-Terra, pg. 64)