Kellyco MPX Digital Owner's manual - page 6
You can adjust the sensitivity at any time, directly by pressing the
or
cursor on the control panel. The status of the sensitivity
will be displayed at the moment that you are pushing the
or
touch pad.
TARGET IDENTIFICATION ICON SCALE –
When a target is detected by the MP
X
, the target Icon corresponding
to the detected metal will cause that Icon to “flash” momentarily for
about 4 seconds. You can easily determine the types of detected
metals according to the Icon location on the Target Identification
Icon Scale.
7
6
Icons will
“FLASH” for
4 seconds
when target
is detected.
TARGET ID SCALE
Using the Discrimination Control to eliminate or tune out "Junk"
and unwanted targets.
PUSH the UP touch
pad for LESS dis-
crimination (Audio
response and
target Icon)
NOTE: When pushing the down touch
pad the eliminated Icon (or Target) will
not show up on the “LCD” screen. (No
audio response and target Icon.)
PUSH the DOWN
touch pad for
MORE
discrimination
When using the down
touch pad for discrimina-
tion you will no longer get an au-
dio response or target Icon indi-
cator on that target. If you want to
hear the audio and see the Icon
response, you can simply push
the up touch pad to decrease the
discrimination.
SEVEN (7) TONE AUDIO TARGET IDENTIFICATION SYSTEM –
By utilizing a seven (7) tone audio identification system you will
quickly learn each tone and the target or targets it represents. The
highest tone will in many cases indicate a larger coin or larger non
iron object. The lowest tone will in most cases indicate an iron target
has been detected. The remaining five (5) tones in the middle will
indicate different size coins, rings and most nickels. Remember you
need to sample some coins and rings to see what tone is produced
by the audio Identification system of the
MP
X
. Continual use and
practice will put these seven (7) tones to memory.
Note about Audio Tone Identification Systems: You will notice
that multiple targets of the same likeness or conductivity will pro-
duce the same tone. This is normal in this type of Audio system, this
is where your experience will pay off.
The top of the control panel has an easy to read graph indicating
the conductive zone of three metal groups. Iron, gold and silver. You
use the graph as an instant reference point of each detected icon
target below.
The lower Icon Symbols are as follows:
Starting from the left, (these only appear when the
MP
X
is on).
1
st
Icon: iron or small nails.
2
nd
Icon: bottle cap or some foils.
3
rd
Icon: pull tab or nickel.
4
th
Icon: gold ring range.
5
th
Icon: dime.
6
th
Icon: US dollar or quarter.
7
th
Icon: 50 cent coin or larger item.
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
LOWEST TONE
HIGHEST TONE
1
2
3
4
5
6
7
By listening to the target tone and watching the “flashing” icon you
can quickly identify most buried targets.
Note: When any target is being detected, the corresponding icon
will flash for several seconds, along with its unique tone.