Kelty KIDS CONVERTIBLE Instruction Manual - Tips
TIPS
6
CONVERTIBLE ADJUSTMENT
ADULT BACKPACK FITTING
NOTE:
• DO NOT adjust
Convertible
with child in it.
• If sharing the
Convertible
between
two adults, we
recommend
that you mark
a reference
point on the
waist belt
adjustment
strap for each
user. This will
ease adjustment
for each user.
Figure 2A
2. ADULT BACKPACK FITTING
A. Lock the front wheels in the forward
position by aligning the sliding red lever
with the locking tab located on the front of
the frame (Figure 2A). Slide the red lever
up to lock.
B. Cover the front wheels by pulling the wheel
cover over and around the front wheels.
C. The waistbelt on your Convertible adjusts
up and down using the straps and locking
flip buckles located between the waistbelt
and mesh backpanel. Release the flip
buckles by rotating latch away from mesh
backpanel (Figure 2B).
Figure 2B
D. Loosen the shoulder straps, waistbelt and
sternum strap.
TIPS
5
BEFORE YOU START
TENSION STRAPS
C. Repeat step A for opposite side.
1. TENSION STRAPS
To assure proper fit and function, the tension straps
must be tightened before use. There are two tension
straps located behind the mesh panel/adult shoulder
straps. The tension straps are labeled “Please tighten
before using.”
Figure 1A
NOTE:
Your new Kelty
Convertible comes
collapsed/folded
for ease of
shipping; it must
be set up and
adjusted prior
to use.
A. Tension straps must be tightened to minimize
cockpit frame movement.
B. Open the cockpit area by spreading the front
cockpit frame away from the cockpit backrest.
Reaching under the cockpit, grasp the end of
the tension strap, and pull down to tighten
(Figure 1A).