Kelvinator KC900ESS User Information - page 14
Replacing the oven light (Fig
. 2)
(NOT COVERED BY THE APPLIANCE
WARRANTEE)
Disconnect the appliance from the electricity
supply
.
Remove the protective glass light-cover by
twisting anticlockwise.
After replacing the bulb B, refit the protective
cover A.
NOTE:
the glass cover may be tight and may
therefore require a tight grip to
release.
Removing the oven door (fig. 1)
To make it easier to clean the oven, the door may
be removed.
The hinges "A" are fitted with two mobile U-bolts "B"
which block the door when it is completely open
if they are hooked onto sections "C" of the hinges.
After this has been done, the door must be lifted up
and taken out. When carrying out this operation,
hold the sides of the oven door beside the hinges.
To refit the door first slide the hinges into their
grooves.
Lastly, before closing the door do not forget to detach
the two mobile U-bolts "B" which were used to hook
the two hinges.
Fig. 1
Fig. 2
12