Kelvinator KC900ESS User Information - page 6
All electrical connections must be performed by a licensed contractor.
All care must be taken to ensure the installation is properly earthed and conforms to local laws.
Cabinet
(see also the figure below):
This appliance is designed for building-in to a standard
865mm wide oven housing.
The housing, adjacent furniture and all materials used in installation must be able to
withstand a minimum temperature of 80°C plus ambient temperature during periods of
operation. In addition, adjacent furniture cabinet doors must be at minimum 3mm from
the appliance at all points. Certain types of vinyl or laminate kitchen furniture cabinetry
are particularly prone to heat damage and discoloration, any delaminati
on or discoloration
of materials which occurs below 80°C plus ambient temperature or where
materials are less
than 3mm from the appliance will be the liability of the owner.
All work must be performed with the appliance disconnected.
Only qualified personnel must carry out installation.
Instruction for installation
4