Kelvinator KCT27036A Installation Manual - page 2
2 contents Kelvinator heat pump hot water system
Congratulations and thank you for choosing our heat pump
hot water system. Before you install the hot water system,
we recommend that you read through the entire installation
manual, which provides instructions on the safe installation
of the hot water system.
To avoid the risks that are always present when you install
a hot water system, it is important that you read the safety
instructions carefully to ensure that the hot water system is
installed correctly and safely.
After unpacking the hot water system please check that it is
not damaged. If in doubt, do not install the hot water system
but contact your local Electrolux Customer Care Centre.
Meanings of symbols used in this manual are shown below:
warning
This symbol indicates information concerning your
personal safety
caution
This symbol indicates information on how to avoid
damaging the hot water system
environmental tips
This symbol indicates tips and information about
economical and ecological use of the hot water system
warning
• Contact an authorised installer for installation of this
hot water system.
• Contact an authorised service technician for repair
or maintenance of this hot water system.
• Installation work must be performed in accordance
with the national standards by authorised personnel
only. Wrong connection can cause over heating or fire.
• This hot water system should be installed in accordance
with AS/NZS3000 and your local electrical wiring rules.
environmental tips
Information on disposal for installers
• Most of the packing materials are recyclable.
Please dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.
• If you wish to dispose of an old hot water system, please
contact your local authorities and ask for the correct
method of disposal.
Important safety instructions
........................................................
3
Heat pump specifications
................................................................
4
Storage tank specifications
...........................................................
5
Components
.........................................................................................
6
Installation
............................................................................................
8
Installation diagram
........................................................................
12
Electrical connection
......................................................................
14
Temperature sensor connection
................................................
16
Commissioning
...................................................................................
17
Warranty
..............................................................................................
19
Conditions of use
This appliance is intended to be used in household and
similar applications such as :
• staff kitchen areas in shops, offices and other working
environments.
• farm houses.
• by clients in hotels, motels and other residential type
environments.
• bed and breakfast type environments
Congratulations
Contents