Kelvinator KHBF336HWF Instruction Book - page 13
49
GB
Placement
The ambient temperature has an effect on the energy con-
sumption and proper operation of the appliance.
When placing, take into consideration that it is practical to
operate the appliance between ambient temperature limits
according to the climate class that is given in the chart
below and can be found in the data label.
Class of climate
Ambient temperature
SN
+10…+32°C
N
+16…+32°C
ST
+18…+38°C
If the ambient temperature goes below the lower data the
temperature of the cooling compartment can go beyond the
prescribed temperature.
If the ambient temperature goes beyond the upper data this
means longer operating time of the compressor, breakdown
in the automatic defrosting increasing temperature in the
cooling compartment or increasing energy consumption.
In the bag of the accessories there are two spacers
which must be fitted in the two top corners.
Slacken the screws and insert the spacer under the screw
head, the re-tighten the screws.
When placing the appliance ensure that it stands level.
This can be achieved by two adjustable feet at the bottom in
front.
Do not stand the appliance on a sunny place or close to a
radiator or cooker.
If it is unavoidable because of furnishing and the appliance
has to be stood near a cooker take these minimum dis-
tances into consideration:
In case of gas or electric cooker 3 cm must be left, when
it is less put a 0,5-1 cm non-flam insulation between the
two appliances.
In case of oil or coal-fired stove the distance must be 30
cms since they give off more heat.
The refrigerator is designed to operate when it is totally
pushed to the wall.
When placing the refrigerator keep minimal distances
recommended in figure.
A: placing it under a wall-cupboard
B: placing it freely