Kemppi MASTERTIG AC/DC 2000 Operation Instructions Manual - 1.  Preface

Mastertig AC/DC 2000, 2500, 2500W, 3500W/0510 – 3

© 

COPYRIGHT

KEMPPI

OY

GH 20

C 100AC

C 100F

ACDC minilog

ACDC pulse

ACDC panel

TTK 160

TTK 220

TTK 350W

1.  PREFACE

1.1.  INTRODUCTION

Congratulations on having purchased this product. Properly installed Kemppi products should 

prove to be productive machines requiring maintenance at only regular intervals. This manual 

is arranged to give you a good understanding of the equipment and its safe operation. It also 

contains maintenance information and technical specifications. Read this manual from front to 

back before installing, operating or maintaining the equipment for the first time. For further 

information on Kemppi products please contact us or your nearest Kemppi distributor.

The specifications and designs presented in this manual are subject to change without prior 

notice.

In this document, for danger to life or injury the following symbol is used:

Read the warning texts carefully and follow the instructions. Please also study the Operation 

safety instructions and respect them when installing, operating and servicing the machine.

1.2.  PRODUCT INTRODUCTION

Mastertig AC/DC is a power source for TIG /MMA welding suitable for AC and DC welding 

and designed for demanding professional use. The power source is an inverter, which is formed 

with IGB transistors. The power source is available in three sizes, 200 A, 250 A and 350 A. The 

250 A power source comes in two separate versions for gas-cooled torches and for water-cooled 

torches. Three different exchangeable panel versions are available for the power source: a basic 

panel, a minilog panel and a pulse panel.