Kemppi Minarc 120 AU Operating Manual - Disclaimer
EN
• Always store the machine in a dry and clean space.
• Protect the machine from sand and dust during use and in storage.
• The recommended operating temperature range is -20 to +40 °C. The
machine’s operation efficiency decreases and it becomes more prone to
damage if used in temperatures in excess of 40 °C.
• Place the machine so that it is not exposed to hot surfaces, sparks or
spatter.
• Make sure the airflow to and from the machine is unrestricted.
• EMC classification of this product is class A in accordance with
electromagnetic compatibility standards CISPR 11 and IEC 60974-10, and
therefore the product is designed to be used in industrial environment
only.
WARNING:
This class A equipment is not intended for use in residential locations
where the electrical power is provided by a public low-voltage supply system. In
those locations it may be difficult to ensure the electromagnetic compatibility
due to conducted and radiated disturbances.
• Arc welding equipment always cause electromagnetic disturbance.
To minimize the harmful effects of this, use the equipment strictly
according to the operating manual and other recommendations.
gas bottles and pneumatic devices
• Adhere to the instructions for handling pneumatic devices and gas
bottles.
• Make sure that gas bottles are used and stored in properly ventilated
spaces. A leaking gas bottle may replace the oxygen in the inhaled air,
causing suffocation.
• Before use, make sure that the gas bottle contains gas suitable for the
intended purpose.
• Always fix the gas cylinder securely in an upright position, against a
cylinder wall rack or purpose-made cylinder cart.
• Never move a protective gas bottle when the flow adjuster is in place.
Put the valve cover in place during transportation.
• Always close the gas cylinder valve after use.
Disclaimer
While every effort has been made to ensure that the information contained
in this guide is accurate and complete, no liability can be accepted for any
errors or omissions. Kemppi reserves the right to change the specification of
the product described at any time without prior notice. Do not copy, record,
reproduce or transmit the contents of this guide without prior permission
from Kemppi.
6
M
inar
c 150, 151, 150
VRD
, 120/150 A
U / © Kemppi O
y / 0901