Ken A Vision MVP - 100 Instruction Manual

Manual is about: Ken A Vision X2000: Product Brochure

Page of 4

Download

Bookmark us

5615 Raytown Road, Kansas City, MO 64133 U.S.A 816-353-4787 Fax. 816-358-5072

Email: info@ken-a-vision.com www.ken-a-vision.com

MVP-50

MVP - 100

Instruction Manual

INS-MVP

Bright

Increases lightness of image

Dark

Decreases lightness of image

Mirror

Toggles between mirror images

Pos/Neg

Toggles between Positive and

Negative projected images

Care and Maintenance of the MVP-100 Camera:

Follow normal practice for any high quality optical instrument:

1. Immediately clean up any spills you might have on the MVP-100.

Particularly any corrosive agents should be wiped off, and/or

neutralized as necessary.

2. Store the MVP-100 covered.

3. Clean the camera lens only with standard lens paper to

preventing scratching.

4. Do not use any liquids to clean the lens, except water. (dampen

a piece of lens paper if oils or fingerprints are on the lens)

5. Store in a clean, dry location away from corrosive agents

and dust.

Page 1
5615 raytown road, kansas city, mo 64133 u.S.A 816-353-4787 fax. 816-358-5072 email: info@ken-a-vision.Com www.Ken-a-vision.Com mvp-50 mvp-50 mvp - 100 mvp - 100 instruction manual ins-mvp bright increases lightness of image dark decreases lightness of image mirror toggles between mirror images pos/...
Page 2
You may connect your mvp-100 camera directly to a computer or multimedia projector(s), or video monitor or recorder (vcr or dvd) or any combination of these output devices. Additionally, the mvp-100 camera may be connected to a network, and that signal may be delivered to any of the peripherals on t...
Page 3
2) mvp-100 to any device which will accept a composite connection (video monitor, multi-media projector, tv, vcr, dvd recorder). Connect the yellow composite cable to the yellow c-vid output button on the mvp-100 to the yellow video in connection on the output device. Turn output device on push the ...
Page 4
*(2) connect the vga out of the computer directly to the vga- in of the mvp-100 camera. Using a second vga cable, connect the monitor-out of the mvp-100 and connect to the video in of the output device. Now, when the computer button on the mvp-100 is toggled, the image on the output device will alte...